EPS Scales RevE
About the EPS Scales RevE PCB
EPS Scales RevE is an open source PCB design by BroncoSpace-Lab, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 197 components from 44 distinct parts.
Other key parts include the LT8612EUDE#PBF, INA260AIPWR, TLV1704AQPWRQ1, LTC6902 and XT60PW-F_C428722. By type, the board carries 99 resistors, 59 capacitors, 15 ICs, 12 diodes, 6 connectors and 3 jumpers.
It belongs with the sensors designs in this gallery.
From the project
Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)
This is the third board of the SCALES EPS. It is based on the RevF schematic which yields the Viking 1-C Board. This board improves on the success of the 1-B board and implements some minor improvements that prevented the Peripheral and Jetson subsystem from activating correctly.
List of Changes in Viking 1-C After Production Errors in Viking 1-B
- Removed R48 - Removed R83 - The above mentioned resistors caused too low of a voltage to fully enable the En pins on the load switches, and by simply removing them we can successfully drive the load switches on using GPIO pins. - Added 3 MCP9808…
Main components on the EPS Scales RevE
EPS Scales RevE bill of materials (BOM)
197 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LT8612EUDE#PBF | QFN-28_L6.0-W3.0-P0.50-BL-EP | U1, U3, U13 |
| 3 | INA260AIPWR | TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL-1 | U2, U5, U16 |
| 3 | TLV1704AQPWRQ1 TLV1704 Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U6, U10, U11 |
| 1 | LTC6902 | MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U7 |
| 1 | XT60PW-F_C428722 | TH_2P-XT60PW-F | U8 |
| 1 | TCA4307DGKR | VSSOP-8_L3.0-W3.0-P0.65-LS4.9-BL | U9 |
| 3 | TPS1HB08BQPWPRQ1 | HTSSOP-16_L5.0-W4.4-P0.65-LS6.4-TL-EP2.9 | U12, U15, U17 |
| 1 | DF11-16DP-2DSA(08) | CONN-TH_DF11-16DP-2DSA-08 | CN1 |
| 2 | DF11-16DP-2DSA | CONN-TH_DF11-16DP-2DSA-08 | J6, J10 |
| 3 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J7, J8, J9 |
| 3 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4 |
| 3 | LED | LED0603-RD_RED | D4, D9, D17 |
| 6 | 1N4151WS-E3-08 1N4448WS-7-F Vishay | SOD-323_L1.8-W1.3-LS2.5-RD | D6, D7, D8, D10, D15, D18 |
| 3 | 150060GS75000 GREEN Wurth | LED_0603_1608Metric | D13, D14, D16 |
| 1 | 47uH | IND-SMD_L10.7-W10.0_ETQP5MXXXX | L1 |
| 1 | 6.1u | IND-SMD_FTKB1207-6R1NT | L2 |
| 1 | 10u | IND-SMD_L8.0-W8.0 | L3 |
| 3 | 10u | C_1210_3225Metric | C1, C2, C3 |
| 3 | 22n | C0402 | C23, C36, C46 |
| 3 | 220n | C0402 | C24, C35, C45 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 2.2u | C0402 | C25, C38, C47 |
| 3 | 10p | C0402 | C26, C39, C60 |
| 14 | 100n | C0402 | C27, C28, C29, C30, C31, C32, C40, C41 +6 |
| 9 | 100uF | CAP-SMD_L7.3-W6.1_TCN4227M025R0100 | C34, C43, C44, C50, C51, C53, C63, C64 +1 |
| 6 | 47u | CAP-SMD_L7.3-W4.3-FD | C52, C56, C57, C58, C61, C62 |
| 15 | 10u | C0402 | C68, C69, C70, C71, C72, C73, C74, C75 +7 |
| 12 | 1k | R0402 | R28, R29, R57, R58, R75, R77, R132, R134 +4 |
| 1 | 14k | R_0603_1608Metric | R34 |
| 1 | 17k | R_0603_1608Metric | R35 |
| 16 | 15k | R0402 | R41, R48, R59, R60, R61, R72, R73, R74 +8 |
| 6 | 4.7k | R_0603_1608Metric | R42, R43, R44, R45, R46, R47 |
| 1 | 196k | R0402 | R55 |
| 20 | 10k | R0402 | R56, R108, R124, R125, R126, R127, R129, R130 +12 |
| 3 | 110k | R0402 | R62, R79, R93 |
| 3 | 47k | R0402 | R63, R81, R91 |
| 3 | 2k | R0402 | R64, R80, R92 |
| 1 | 240k | R0402 | R65 |
| 17 | 100k | R0402 | R66, R133, R135, R136, R137, R138, R150, R152 +9 |
| 3 | ESR18EZPF10R0 10 Rohm Semiconductor | R_1206_3216Metric | R85, R86, R94 |
| 1 | 20.8k | R0402 | R103 |
| 1 | 5k | R0402 | R104 |
| 1 | 56.2k | R0402 | R107 |
| 6 | 3k | R0402 | R128, R131, R145, R146, R161, R162 |
| 3 | 4.7M | R0402 | R140, R154, R170 |
EPS Scales RevE design files
The KiCad project lives in the BroncoSpace-Lab/scales-hardware repository on GitHub; these links point at the commit this page was built from.
EPS Scales RevE: common questions
How big is the EPS Scales RevE PCB?
The EPS Scales RevE measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the EPS Scales RevE?
197 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the EPS Scales RevE design files?
From the BroncoSpace-Lab/scales-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EPS Scales RevE design in my own project?
The repository has no license, so all rights stay with BroncoSpace-Lab. Use it as a reference, and ask the author before reusing the design.
More boards in scales-hardware
SCALES Leviathan V2
100 × 100 mm415 parts6LNo license6
Mariner 1-A
100 × 100 mm235 parts6LNo license6
EPS Scales RevE GECKOS
100 × 100 mm197 parts4LNo license6
EPS Scales RevD
100 × 100 mm197 parts4LNo license6
EPS Scales RevC
95.2 × 66 mm194 parts4LNo license6
EPS Scales RevG
100 × 100 mm176 parts4LNo license6
RP2040/RP2350Peripheral board v1a
100.2 × 100.1 mm171 parts6LNo license6- schematic only · 157 parts
EPS Scales RevA
157 parts2LNo license6 - schematic only · 157 parts
EPS Scales RevB
157 parts2LNo license6 
Periph ethernet switch
110.3 × 100.2 mm125 parts6LNo license6
RTW production pathfinder V1
56 × 51 mm95 parts2LNo license6
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956