19 open source boards using the TCA4307DGKR

Real designs built with the TCA4307DGKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the TCA4307DGKR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TCA4307DGKR connects to, and the resistors, capacitors and other passives placed on it.

  • The SCLOUT pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ (then 2.2 kΩ).
  • The SDAOUT pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ (then 2.2 kΩ).
  • The EN pin has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ (then 100 kΩ).
  • The SCLIN pin has a pull-up to 3.3V on 5 of 7 designs, most often 10 kΩ (then 4.7 kΩ).
ENpin 1Connected to: TCA9548ARGERQ1 29%, the microcontroller 29%
  • Pull-up to 3.3V on 86% · 10 kΩ (5), 100 kΩ (1)
SCLOUTpin 2Connected to: A connector 29%, TCA9548ARGERQ1 29%
  • Pull-up to 3.3V on 100% · 10 kΩ (5), 2.2 kΩ (1), 4.7 kΩ (1)
SCLINpin 3Connected to: The microcontroller 43%, a connector 43%, INA219AxDCN 29%
  • Pull-up to 3.3V on 71% · 10 kΩ (2), 4.7 kΩ (2), 2.2 kΩ (1)
GNDpin 4Connected to: GND 100%
READYpin 5Connected to: Signal 71% · not connected 29%
  • Pull-up to 3.3V on 71% · 10 kΩ (5)
SDAINpin 6Connected to: The microcontroller 43%, a connector 43%, INA219AxDCN 29%
  • Pull-up to 3.3V on 71% · 10 kΩ (2), 4.7 kΩ (2), 2.2 kΩ (1)
SDAOUTpin 7Connected to: A connector 29%, TCA9548ARGERQ1 29%
  • Pull-up to 3.3V on 100% · 10 kΩ (5), 2.2 kΩ (1), 4.7 kΩ (1)
VCCpin 8Connected to: 3.3V 86%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EPS Scales RevC by BroncoSpace-Lab, FC V5d Pro Rev1 by proveskit, Billee hardware-2027 by BILLEE-BroncoSTAR and Slab Keyboard - Hackpad Module by headblockhead.

The TCA4307DGKR in open source designs

The gallery holds 19 open source boards using the TCA4307DGKR from 7 GitHub repositories; a typical one measures about 100 × 94.5 mm and carries around 197 components.

68% use four copper layers or more, and 42% carry an open source license.

The most starred is SCALES Leviathan V2 by BroncoSpace-Lab.

Microcontrollers on boards using the TCA4307DGKR

What boards using the TCA4307DGKR are built for

TCA4307DGKR: common questions

Where can I find a TCA4307DGKR reference design?

Each of the 19 boards on this page is a real design using the TCA4307DGKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the TCA4307DGKR SCLOUT pin?

The SCLOUT pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the TCA4307DGKR.

What pull-up resistor is used on the TCA4307DGKR SDAOUT pin?

The SDAOUT pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the TCA4307DGKR.

What pull-up resistor is used on the TCA4307DGKR EN pin?

The EN pin has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 7 open source designs using the TCA4307DGKR.

What parts are used alongside the TCA4307DGKR?

The RP2350_60QFN, TLV1704AQPWRQ1, AP22653AW6-7, INA219AxDCN and LIS2MDL appear in the most repositories here.

Which microcontrollers do boards using the TCA4307DGKR use?

Most are built on RP2040/RP2350 (9).

How big is a typical board using the TCA4307DGKR?

The median is 100 × 94.5 mm, and 32% are two-layer designs.

What is the most popular open source board using the TCA4307DGKR?

By GitHub stars, SCALES Leviathan V2 by BroncoSpace-Lab, with 6 stars.

Can I simulate one of these boards using the TCA4307DGKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part