SMU V1 (tony.wang@bruinracing.org)
bruinformula·mk11-DAQ-SMU·SMU V1/SMU V1 (tony.wang@bruinracing.org).kicad_pcb
About the SMU V1 (tony.wang@bruinracing.org) PCB
SMU V1 (tony.wang@bruinracing.org) is an open source PCB design by bruinformula, published on GitHub. It is a 4-layer board measuring 72.9 × 113.5 mm, with 82 components from 56 distinct parts.
Other key parts include the C410529, LSM6DSOTR, TPS7A2033PDBVR and ETQ-P3M150KVN. By type, the board carries 31 capacitors, 22 test points, 11 resistors, 6 ICs, 4 diodes and 3 connectors.
It belongs with the rf & radio, sensors and test & measurement designs in this gallery.
From the project
spatial measurement unit: combination IMU/GPS unit
Main components on the SMU V1 (tony.wang@bruinracing.org)
SMU V1 (tony.wang@bruinracing.org) bill of materials (BOM)
82 components, 56 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C410529 Krill | TE_1-2199119-5 | MCU201 |
| 1 | LSM6DSOTR STMicroelectronics | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U601 |
| 2 | TPS7A2033PDBVR Texas Instruments | SOT-23-5_HandSoldering | U701, U801 |
| 1 | TPS7A2033PDBVR TPS5430DDAR | TI_SO-PowerPAD-8 | U901 |
| 1 | ETQ-P3M150KVN Panasonic Electronic Components | BWVS005050404R7M00 | U902 |
| 1 | SI2301CDS-T1-GE3 | SOT-23-3 | Q1101 |
| 2 | Connector Molex | Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J401, J402 |
| 1 | SMA Samtec Inc. | THT SMA | J1001 |
| 1 | 500mA Bel Fuse | Fuse_1812_4532Metric | F1101 |
| 1 | LC29HEAMD Quectel Inc. | Quectel LC49 | GPS501 |
| 1 | CANH ronghe | TestPoint_Keystone_5019_Miniature | TP205 |
| 1 | CANL ronghe | TestPoint_Keystone_5019_Miniature | TP206 |
| 1 | C5199800 VBATT_RAW ronghe | TestPoint_Keystone_5019_Miniature | TP301 |
| 1 | VBATT_PROT ronghe | TestPoint_Keystone_5019_Miniature | TP302 |
| 1 | +5V ronghe | TestPoint_Keystone_5019_Miniature | TP303 |
| 4 | GND ronghe | TestPoint_Keystone_5019_Miniature | TP305, TP306, TP307, TP308 |
| 1 | GPS1_UART_RX GPS_UART_RX ronghe | TestPoint_Keystone_5019_Miniature | TP501 |
| 1 | GPS1_UART_TX GPS_UART_TX ronghe | TestPoint_Keystone_5019_Miniature | TP502 |
| 1 | GPS2_UART_RX GPS_WKUP ronghe | TestPoint_Keystone_5019_Miniature | TP503 |
| 1 | GPS2_UART_TX GPS_1PPS ronghe | TestPoint_Keystone_5019_Miniature | TP504 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GPS_nRST ronghe | TestPoint_Keystone_5019_Miniature | TP505 |
| 1 | GPS_+3V3 ronghe | TestPoint_Keystone_5019_Miniature | TP506 |
| 1 | C5199800 IMU_+3V3 ronghe | TestPoint_Keystone_5019_Miniature | TP601 |
| 1 | C5199800 IMU_INT2 ronghe | TestPoint_Keystone_5019_Miniature | TP602 |
| 1 | C5199800 IMU_INT1 ronghe | TestPoint_Keystone_5019_Miniature | TP603 |
| 1 | C5199800 IMU_SPI_CS ronghe | TestPoint_Keystone_5019_Miniature | TP604 |
| 1 | IMU_SPI_MISO ronghe | TestPoint_Keystone_5019_Miniature | TP605 |
| 1 | IMU_SPI_MOSI ronghe | TestPoint_Keystone_5019_Miniature | TP606 |
| 1 | IMU_SPI_SCK ronghe | TestPoint_Keystone_5019_Miniature | TP607 |
| 1 | 16Vrwm Bourns Inc. | D_SMA-SMB_Universal_Handsoldering | TVS1101 |
| 2 | C2297 GPS Power | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D701, D801 |
| 1 | C2297 550m | D_SMA_Handsoldering | D901 |
| 1 | Vbatt PGOOD | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1101 |
| 1 | 68n Murata Electronics | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1001 |
| 7 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C201, C202, C203, C204, C502, C601, C602 |
| 4 | 22U 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C401, C402, C403, C404 |
| 1 | 33P 33p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C501 |
| 1 | 4.7U 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C503 |
| 4 | 2.2U 2.2u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C701, C702, C801, C802 |
| 2 | 2.2U 22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C901, C902 |
| 1 | 1.8p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C903 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C904 |
| 5 | 100u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C905, C906, C907, C908, C909 |
| 1 | 1.8P 100p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1001 |
| 1 | 10N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1002 |
| 2 | 22U 100p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1003, C1004 |
| 1 | 100U 100p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1005 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R102 |
| 2 | 120 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R202 |
| 2 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R701, R801 |
| 1 | 120 180k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R901 |
| 1 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R902 |
| 1 | 3.3k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R903 |
| 1 | 180K 10 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1001 |
| 1 | 10K 0 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1002 |
| 1 | 1.8k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1101 |
SMU V1 (tony.wang@bruinracing.org) design files
The KiCad project lives in the bruinformula/mk11-DAQ-SMU repository on GitHub; these links point at the commit this page was built from.
SMU V1 (tony.wang@bruinracing.org): common questions
How big is the SMU V1 (tony.wang@bruinracing.org) PCB?
The SMU V1 (tony.wang@bruinracing.org) measures 72.9 × 113.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SMU V1 (tony.wang@bruinracing.org)?
82 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SMU V1 (tony.wang@bruinracing.org) design files?
From the bruinformula/mk11-DAQ-SMU repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SMU V1 (tony.wang@bruinracing.org) design in my own project?
The repository has no license, so all rights stay with bruinformula. Use it as a reference, and ask the author before reusing the design.
More boards in mk11-DAQ-SMU
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k