SMU V3
bruinformula·mk11-DAQ-SMU·SMU V3/SMU V3.kicad_pcb
About the SMU V3 PCB
SMU V3 is an open source PCB design by bruinformula, published on GitHub. It is a 4-layer board measuring 51.4 × 76.4 mm, with 92 components from 42 distinct parts.
Other key parts include the C410529, LSM6DSOTR, TPS7A2033PDBVR, ETQ-P3M150KVN and TPS5430DDAR. By type, the board carries 41 capacitors, 15 resistors, 9 test points, 9 diodes, 7 ICs and 4 connectors.
It belongs with the rf & radio, sensors and test & measurement designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
spatial measurement unit: combination IMU/GPS unit
Main components on the SMU V3
SMU V3 bill of materials (BOM)
92 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C410529 Krill Foxconn | Krill | MCU201 |
| 1 | LSM6DSOTR STMicroelectronics | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U601 |
| 3 | TPS7A2033PDBVR Texas Instruments | SOT-23-5_HandSoldering | U701, U801, U901 |
| 1 | ETQ-P3M150KVN Panasonic Electronic Components | BWVS005050404R7M00 | U1001 |
| 1 | TPS5430DDAR | TI_SO-PowerPAD-8 | U1002 |
| 1 | SI2301CDS-T1-GE3 | SOT-23-3 | Q1201 |
| 2 | Connector Molex | Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J401, J402 |
| 2 | C5199904 SMA Samtec Inc. | THT SMA | J1101, J1201 |
| 1 | 500MA 500mA Bel Fuse | Fuse_1812_4532Metric | F1201 |
| 2 | LC29HEAMD | Quectel LC49 | GPS501, GPS502 |
| 1 | C5199800 SMD Test Point ronghe | TestPoint_Keystone_5019_Miniature | TP301 |
| 1 | GPS1_UART_RX ronghe | TestPoint_Keystone_5019_Miniature | TP501 |
| 1 | GPS1_UART_TX ronghe | TestPoint_Keystone_5019_Miniature | TP502 |
| 1 | GPS2_UART_RX ronghe | TestPoint_Keystone_5019_Miniature | TP503 |
| 1 | GPS2_UART_TX ronghe | TestPoint_Keystone_5019_Miniature | TP504 |
| 1 | C5199800 IMU_SPI_CS ronghe | TestPoint_Keystone_5019_Miniature | TP601 |
| 1 | C5199800 IMU_SPI_MISO ronghe | TestPoint_Keystone_5019_Miniature | TP602 |
| 1 | C5199800 IMU_SPI_MOSI ronghe | TestPoint_Keystone_5019_Miniature | TP603 |
| 1 | C5199800 IMU_SPI_SCK ronghe | TestPoint_Keystone_5019_Miniature | TP604 |
| 1 | 16VRWM 16Vrwm Bourns Inc. | D_SMA-SMB_Universal_Handsoldering | TVS1201 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | C2297 Green | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D101, D201, D701, D801, D901, D1201 |
| 1 | C2296 Yellow | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D202 |
| 1 | C2286 Red | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D203 |
| 1 | 550M 550m | D_SMA_Handsoldering | D1001 |
| 2 | 68N 68n Murata Electronics | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1101, L1201 |
| 10 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C201, C202, C203, C204, C502, C505, C601, C602 +2 |
| 4 | 22U 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C401, C402, C403, C404 |
| 2 | 33P 33p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C501, C504 |
| 2 | 4.7U 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C503, C506 |
| 6 | 2.2U 2.2u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C701, C702, C801, C802, C901, C902 |
| 1 | 1.8P 1.8p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1001 |
| 1 | 10N 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1002 |
| 2 | 22U 22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1003, C1004 |
| 5 | 100U 100u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1005, C1006, C1007, C1008, C1009 |
| 8 | 100P 100p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1102, C1103, C1104, C1105, C1202, C1203, C1204, C1205 |
| 7 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R101, R201, R202, R203, R701, R801, R901 |
| 1 | 180K 180k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1001 |
| 1 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1002 |
| 1 | 3.3K 3.3k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1003 |
| 2 | 10 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1101, R1201 |
| 2 | 0 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1102, R1203 |
| 1 | 1.8K 1.8k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1202 |
SMU V3 design files
The KiCad project lives in the bruinformula/mk11-DAQ-SMU repository on GitHub; these links point at the commit this page was built from.
- LayoutSMU V3/SMU V3.kicad_pcb
- SchematicSMU V3/SMU V3.kicad_sch
- BOMSMU V3/production/bom.csv
SMU V3: common questions
How big is the SMU V3 PCB?
The SMU V3 measures 51.4 × 76.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SMU V3?
92 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SMU V3 design files?
From the bruinformula/mk11-DAQ-SMU repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SMU V3 design in my own project?
The repository has no license, so all rights stay with bruinformula. Use it as a reference, and ask the author before reusing the design.
More boards in mk11-DAQ-SMU
Earlier revisions in the repo: SMU V2, SMU V1
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k