Datalogger esp8266 PANELIZED

BrunoRicci·DataloggerDHT22·Hardware/Datalogger_esp8266/Datalogger_esp8266_PANELIZED.kicad_pcb

Datalogger esp8266 PANELIZED PCB layout, top view — open source board by BrunoRicci

About the Datalogger esp8266 PANELIZED PCB

Datalogger esp8266 PANELIZED is an open source PCB design by BrunoRicci, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 29.4 × 32.3 mm, with 60 components from 31 distinct parts.

Other key parts include the TP4056, IRF7105 and MCP1700-330-TO-92. By type, the board carries 29 resistors, 7 capacitors, 6 transistors, 5 jumpers, 4 connectors and 4 test points.

It belongs with the sensors designs in this gallery.

From the project

Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.

Hardware files. Schematics, simulations, measurements, PCB layouts and mechanical diagrams.

Main components on the Datalogger esp8266 PANELIZED

TP4056 IRF7105MCP1700-330-TO-92

Datalogger esp8266 PANELIZED bill of materials (BOM)

60 components, 31 distinct parts.

Qty	Part	Footprint	Refs
1	TP4056	SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm	U1
1	IRF7105	SOIC-8_3.9x4.9mm_Pitch1.27mm	U2
1	MCP1700-330-TO-92	TO-92_Inline_Wide	U3
4	BC817	SOT-23	Q1, Q2, Q4, Q6
2	BC857	SOT-23	Q3, Q5
1	BAT	Pin_Header_Straight_1x02_Pitch2.54mm	J1
2	Conn_01x08	Pin_Header_Straight_1x08_Pitch2.54mm	J2, J3
1	DHT22 SENSORS	Multicomp_MC9A12-1434_2x07x2.54mm_Straight	J4
1	ON	Solder_bridge	JP1
1	CH	Solder_bridge	JP2
2	BAT	Solder_bridge	JP3, JP5
1	VSS	Solder_bridge	JP4
2	CH	Test_point_SMD_round	TP1, TP2
1	TX	Test_point_SMD_round	TP3
1	RX	Test_point_SMD_round	TP4
1	D_Small	D_MiniMELF	D1
1	LED_ARGB	LED_RGB_1210	D2
4	100nF	C_0805	C1, C2, C4, C6
1	470nF	C_0805	C3
1	1uF	C_0805	C5

Show 11 more

Qty	Part	Footprint	Refs
1	10uFx16V	CP_Radial_D4.0mm_P2.00mm	C7
5	470k	R_0805	R1, R4, R15, R27, R28
1	0.33R	R_1206	R2
5	100K	R_0805	R3, R6, R8, R21, R22
7	10k	R_0805	R5, R9, R13, R20, R23, R26, R29
1	1M	R_0805	R7
3	10M	R_0805	R10, R11, R12
1	1M2	R_0805	R14
1	330k	R_0805	R16
3	1k	R_0805	R17, R18, R19
2	22k	R_0805	R24, R25

Datalogger esp8266 PANELIZED design files

The KiCad project lives in the BrunoRicci/DataloggerDHT22 repository on GitHub; these links point at the commit this page was built from.

LayoutHardware/Datalogger_esp8266/Datalogger_esp8266_PANELIZED.kicad_pcb

Datalogger esp8266 PANELIZED: common questions

How big is the Datalogger esp8266 PANELIZED PCB?

The Datalogger esp8266 PANELIZED measures 29.4 × 32.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Datalogger esp8266 PANELIZED?

60 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Datalogger esp8266 PANELIZED design files?

From the BrunoRicci/DataloggerDHT22 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Datalogger esp8266 PANELIZED design in my own project?

Yes, under the terms of its GPL-2.0 license, which BrunoRicci chose for the repository.

More boards in DataloggerDHT22

Similar boards