Rotor sensor
c4deszes·bike-rotor-sensor·hardware/design/rotor-sensor/rotor-sensor.kicad_pcb
About the Rotor sensor PCB
Rotor sensor is an open source Microchip SAM PCB design by c4deszes, published on GitHub. It is a 2-layer board measuring 37 × 32.5 mm, with 46 components from 26 distinct parts.
Its main chip is the ATSAMD21E18A-MUT, from the Microchip SAM family. Other key parts include the MAX9621AUB+T, MCP2003BT-E/MC, BMI088, TPS629210DRLR and BMP581. By type, the board carries 19 capacitors, 13 resistors, 8 ICs, 3 diodes, 2 inductors and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
Speed sensor for bicycle
Main components on the Rotor sensor
Rotor sensor bill of materials (BOM)
46 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MAX9621AUB+T | MSOP-10_3x3mm_P0.5mm | U1, U8 |
| 1 | MCP2003BT-E/MC | DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U2 |
| 1 | BMI088 | Bosch_LGA16 | U3 |
| 1 | TPS629210DRLR | SOT-583-8 | U6 |
| 1 | ~ | SOIC-4 | U7 |
| 1 | ATSAMD21E18A-MUT | VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U10 |
| 1 | BMP581 | Bosch_LGA10 | U600 |
| 1 | Conn_01x06 | SOIC-6 | J2 |
| 1 | BAS3005B02 | D_SOD-523 | D1 |
| 1 | MM5Z3V6T1G | D_SOD-523 | D2 |
| 1 | SDT23C15L02 | SOT-23 | D4 |
| 1 | 10uH | L_0603_1608Metric | L1 |
| 1 | 2.2u | L_Coilcraft_LPS3010 | L3 |
| 13 | 100n | C_0402_1005Metric | C1, C2, C3, C6, C8, C9, C12, C15 +5 |
| 2 | 10u | C_0402_1005Metric | C4, C5 |
| 1 | 2.2u | C_0402_1005Metric | C7 |
| 1 | 220p | C_0603_1608Metric | C10 |
| 1 | 22u | C_0805_2012Metric | C11 |
| 1 | 10u | C_0805_2012Metric | C16 |
| 6 | 4.7k | R_0402_1005Metric | R1, R3, R4, R6, R15, R17 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47k | R_0402_1005Metric | R2 |
| 1 | 20k | R_0402_1005Metric | R5 |
| 1 | 0 | R_0402_1005Metric | R7 |
| 2 | 63.4k | R_0603_1608Metric | R9, R18 |
| 1 | 1k | R_0402_1005Metric | R12 |
| 1 | 10k | R_0402_1005Metric | R13 |
Rotor sensor design files
The KiCad project lives in the c4deszes/bike-rotor-sensor repository on GitHub; these links point at the commit this page was built from.
Rotor sensor: common questions
What microcontroller does the Rotor sensor use?
The Rotor sensor is built around the ATSAMD21E18A-MUT, from the Microchip SAM family.
How big is the Rotor sensor PCB?
The Rotor sensor measures 37 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rotor sensor?
46 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rotor sensor design files?
From the c4deszes/bike-rotor-sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rotor sensor design in my own project?
The repository has no license, so all rights stay with c4deszes. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rotor sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in bike-rotor-sensor
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416