PlancH
caccia78·PlancH·hardware/planch/planch.kicad_pcb
About the PlancH PCB
PlancH is an open source ESP32 PCB design by caccia78, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 120 × 52 mm, with 40 components from 8 distinct parts.
Its main chip is the ESP32-S3-Zero, from the ESP32 family. Other key parts include the SSD1306 0.96in I2C module. By type, the board carries 14 capacitors, 13 diodes, 10 switches, 2 ICs and 1 resistor.
It belongs with the displays & leds and iot & wireless designs in this gallery.
From the project
Open source desk button panel for Home Assistant: ESP32-S3, ESPHome, OLED display, 10 buttons and RGB backlight. KiCad sources, Gerbers and a 3D-printable stand.
A desk button panel for Home Assistant. Ten tactile buttons, a small OLED display, a touch area and thirteen addressable RGB LEDs on a black PCB that sits on your desk, either on its own rubber feet or on a 3D-printed stand. Powered by a Waveshare ESP32-S3-Zero running ESPHome, with native Home Assistant integration.
📖 Documentation: caccia78.github.io/PlancH

Main components on the PlancH
PlancH bill of materials (BOM)
40 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-Zero Waveshare | Waveshare_ESP32-S3-Zero_Castellated | U1 |
| 1 | SSD1306 0.96in I2C module OLED 0.96in SSD1306 | OLED_SSD1306_0.96in_I2C_24.8x26.9mm | U2 |
| 10 | PTS645SH43SMTR92 LFS PTS645SH43 C&K | SW_SPST_PTS645Sx43SMTR92_NoSilk | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 7 | SK6812MINI-E Opsco | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount_HandSolder | D1, D2, D3, D4, D5, D6, D7 |
| 6 | SKC6812RV SK6812 5050 RGB Opsco | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D8, D9, D10, D11, D12, D13 |
| 13 | CL21B104KBCNNNC 100n Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +5 |
| 1 | CL31A476MPHNNNE 47u Samsung | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | RC0805FR-07330RL 330 Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
PlancH design files
The KiCad project lives in the caccia78/PlancH repository on GitHub; these links point at the commit this page was built from.
PlancH: common questions
What microcontroller does the PlancH use?
The PlancH is built around the ESP32-S3-Zero, from the ESP32 family.
How big is the PlancH PCB?
The PlancH measures 120 × 52 mm, has 2 copper layers and is 2 mm thick.
How many components are on the PlancH?
40 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PlancH design files?
From the caccia78/PlancH repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PlancH design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which caccia78 chose for the repository.
Can I test firmware for the PlancH without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k