Lupo Testing
CalPolySpaceSystems·circuitCAD·Projects/MiniRek/Lupo_Testing.kicad_pcb
About the Lupo Testing PCB
Lupo Testing is an open source Microchip SAM PCB design by CalPolySpaceSystems, published on GitHub. It is a 2-layer board measuring 71.1 × 34.9 mm, with 57 components from 37 distinct parts.
Its main chip is the ATSAMD21G18_QFN, from the Microchip SAM family. Other key parts include the FXPQ3115BV, LSM9DS1, nRF24L01P, SST26VF064B and TPS630250RNC. By type, the board carries 29 capacitors, 9 resistors, 6 ICs, 4 diodes, 4 inductors and 2 crystals.
From the project
Circuit board designs and resources for Cal Poly Space Systems' avionics
Main components on the Lupo Testing
Lupo Testing bill of materials (BOM)
57 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21G18_QFN | QFN-48-1EP_7x7mm_Pitch0.5mm | U1 |
| 1 | FXPQ3115BV | LGA-8_3x5mm_Pitch1.25mm | U3 |
| 1 | LSM9DS1 | LGA-24L_3x3.5mm_Pitch0.43mm | U4 |
| 1 | nRF24L01P | QFN-20-1EP_4x4mm_Pitch0.5mm | U5 |
| 1 | SST26VF064B | SOIJ-8_5.3x5.3mm_Pitch1.27mm | U7 |
| 1 | TPS630250RNC | TPS630250RNCR | U8 |
| 1 | Crystal | Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | ABS07-32.768KHZ-9-T | Crystal_SMD_EuroQuartz_EQ161-2pin_3.2x1.5mm_HandSoldering | Y2 |
| 1 | Conn_01x02 | Amphenol_RF_SMA_132289 | J1 |
| 1 | Conn_01x02 | Keystone_1058_1x2032-CoinCell | J3 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 2 | LED | D_0805 | D1, D4 |
| 1 | D_Schottky | D_SMA_Handsoldering | D2 |
| 1 | D_Schottky | D_1206 | D3 |
| 1 | 12nH | L_0603_HandSoldering | L1 |
| 1 | 2.3nH | L_0603_HandSoldering | L2 |
| 1 | 7.9nH | L_0603_HandSoldering | L3 |
| 1 | 1uH | L_Wuerth_MAPI-4030 | L4 |
| 3 | 0.1u | C_0603_HandSoldering | C1, C2, C4 |
| 1 | 1u | C_0603_HandSoldering | C3 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 0.1uF | C_0603_HandSoldering | C5, C6, C9, C10, C14, C20, C35 |
| 2 | 10nF | C_0603_HandSoldering | C7, C11 |
| 3 | 10uF | C_0805_HandSoldering | C8, C16, C29 |
| 1 | 33nF | C_0603_HandSoldering | C12 |
| 1 | 1nF | C_0603_HandSoldering | C13 |
| 2 | 10p | C_0603_HandSoldering | C15, C17 |
| 1 | 4.7pF | C_0603_HandSoldering | C19 |
| 2 | 10pF | C_0603_HandSoldering | C22, C25 |
| 1 | 2.2nF | C_0603_HandSoldering | C24 |
| 1 | 15pF | C_0603_HandSoldering | C28 |
| 1 | 1.5pF | C_0603_HandSoldering | C30 |
| 2 | 22uF | C_0805_HandSoldering | C36, C38 |
| 1 | 4.7n | C_0603_HandSoldering | C39 |
| 1 | 22k | R_0603_HandSoldering | R1 |
| 6 | 4.7k | R_0603_HandSoldering | R2, R3, R8, R10, R11, R12 |
| 1 | 1M | R_0603_HandSoldering | R6 |
| 1 | 100k | R_0603_HandSoldering | R13 |
Lupo Testing design files
The KiCad project lives in the CalPolySpaceSystems/circuitCAD repository on GitHub; these links point at the commit this page was built from.
Lupo Testing: common questions
What microcontroller does the Lupo Testing use?
The Lupo Testing is built around the ATSAMD21G18_QFN, from the Microchip SAM family.
How big is the Lupo Testing PCB?
The Lupo Testing measures 71.1 × 34.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lupo Testing?
57 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lupo Testing design files?
From the CalPolySpaceSystems/circuitCAD repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Lupo Testing design in my own project?
The repository has no license, so all rights stay with CalPolySpaceSystems. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lupo Testing without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in circuitCAD
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416