Obc peripherals
About the Obc peripherals PCB
Obc peripherals is an open source PCB design by candacedo, published on GitHub under the MIT license. It is a 2-layer board measuring 42 × 42 mm, with 4 components from 4 distinct parts.
By type, the board carries 2 ICs and 2 connectors.
It belongs with the rf & radio, power & battery and sensors designs in this gallery.
From the project
TigerCub, an accessible PocketQube platform.
TigerCub is a satellite bus in the PocketQube form factor, designed to be accessible to students and amateur nanosatellite developers. It uses primarily commercial-off-the-shelf (COTS) components and relatively simple custom-designed PCBs, lowering barriers of entry for developers who are venturing into the PocketQube world.
I developed TigerCub for my undergraduate senior independent work. The vast majority of design work is complete and some subsystems have been tested in laboratory environments, but the satellite bus has yet to undergo full functional testing and testing in flight-like…
Obc peripherals bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Adafruit_LSM6DS3TR-C_LIS3MDL | U1 |
| 1 | ~ | Adafruit_MicroSD | U3 |
| 1 | ~ | PinSocket_1x10_P2.00mm_Vertical | J2 |
| 1 | ~ | PinSocket_1x05_P2.00mm_Vertical | J6 |
Obc peripherals design files
The KiCad project lives in the candacedo/tigercub-pq repository on GitHub; these links point at the commit this page was built from.
- LayoutOBC2/obc-peripherals.kicad_pcb
- SchematicOBC2/obc-peripherals.kicad_sch
Obc peripherals: common questions
How big is the Obc peripherals PCB?
The Obc peripherals measures 42 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Obc peripherals?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Obc peripherals design files?
From the candacedo/tigercub-pq repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Obc peripherals design in my own project?
Yes, under the terms of its MIT license, which candacedo chose for the repository.
More boards in tigercub-pq
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k