Toxic-Detection

capopaul·Toxic-Detection-PCB·Toxic_Detection_v4.0/Toxic_Detection_v4.0.kicad_pcb

Toxic-Detection PCB layout, top view — open source ESP32 board by capopaul

About the Toxic-Detection PCB

Toxic-Detection is an open source ESP32 PCB design by capopaul, published on GitHub under the MIT license. It is a 4-layer board measuring 120 × 65 mm, with 181 components from 51 distinct parts.

Its main chip is the ESP32-WROOM-32E-N16, from the ESP32 family. Other key parts include the STM32H755ZIT3, AT25SF321B-SSHB-B, ADS7828E/2K5, ESDA6V1U1RL and AZ1084CD-3.3TRG1. By type, the board carries 78 capacitors, 55 resistors, 19 connectors, 9 ICs, 8 diodes and 2 transistors.

From the project

This project contains the Revision 4 for the PCB design of the AirU, ChemAirU, Toxic-Detection project.

This project contains the Revision 4 for the PCB design of the AirU, ChemAirU, Toxic-Detection project.

As this project aims to create the revision 4, all documentation documents will starts at revision 4.0.

1. Product Brief 2. Design Notes 3. Schematic v4.3 4. Layout v4.2

./doc -> documentations, components datasheets and libraries

- [ ] Schematic under review - [ ] Layout under review - [ ] PCB order

Toxic-Detection, from the project README
From the project README

Main components on the Toxic-Detection

ESP32-WROOM-32E-N16STM32H755ZIT3AT25SF321B-SSHB-BADS7828E/2K5ESDA6V1U1RLAZ1084CD-3.3TRG1TPS2054BDR

Toxic-Detection bill of materials (BOM)

181 components, 51 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E-N16
IC1
1
STM32H755ZIT3
IC2
1
AT25SF321B-SSHB-B
IC3
3
ADS7828E/2K5
ADS7828E_2K5
IC4, IC5, IC6
1
ESDA6V1U1RL
IC7
1
AZ1084CD-3.3TRG1
IC8
1
TPS2054BDR
IC9
2
BSS138-G
Q1, Q2
1
ECS-250-18-36B2-CTY-TR
Y1
1
CM9V-T1A-32.768KHZ-12.5PF-20PPM-TA-QC
Y2
1
Conn_01x11_Pin
J1
1
Conn_01x10_Pin
J2
1
Conn_01x14_Pin
J3
1
Conn_01x16_Pin
J4
1
Conn_01x18_Pin
J5
2
79107-7205
J6, J7
1
Conn_01x06_Pin
J8
2
Conn_01x04_Pin
J9, J10
1
USB_C_Receptacle
J11
1
DM3AT-SF-PEJM5
J12
Show 31 more
QtyPartRefs
1
Conn_01x03_Pin
J13
4
Conn_01x01_Pin
J14, J15, J16, J18
1
Conn_01x02_Pin
J20
1
FTSH-105-01-L-DV-K
J21
1
SAM-M10Q-00B
ANT1
1
Polyfuse
F1
2
Jumper_3_Open
JP1, JP2
1
AP2210K-5.0TRG1
PS1
2
SW_Push
SW1, SW2
3
DT1042-02SR-7
D1, D2, D3
2
1N5819
D4, D5
1
RED_LED_5mA
D6
2
GREEN_LED_2mA
D7, D8
1
2.2uH, 1.2A
L1
32
100nF
C1, C3, C4, C6, C7, C9, C10, C11 +24
5
22uF
C2, C46, C50, C52, C53
1
4.7uF
C5
26
1uF
C8, C25, C48, C56, C57, C58, C59, C60 +18
5
10uF
C21, C22, C23, C42, C43
1
220pF
C24
2
16pF
C26, C35
3
2.2uF
C28, C33, C45
2
5pF
C29, C30
1
100pF
C47
9
10k
R1, R2, R9, R18, R19, R20, R24, R26 +1
13
0
R3, R4, R5, R6, R7, R8, R10, R11 +5
4
4K
R14, R15, R16, R17
2
5.1k
R23, R25
1
1k
R29
2
2k
R30, R33
24
6.2
R31, R32, R34, R35, R36, R37, R38, R39 +16

Toxic-Detection design files

The KiCad project lives in the capopaul/Toxic-Detection-PCB repository on GitHub; these links point at the commit this page was built from.

Toxic-Detection: common questions

What microcontroller does the Toxic-Detection use?

The Toxic-Detection is built around the ESP32-WROOM-32E-N16, from the ESP32 family.

How big is the Toxic-Detection PCB?

The Toxic-Detection measures 120 × 65 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Toxic-Detection?

181 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Toxic-Detection design files?

From the capopaul/Toxic-Detection-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Toxic-Detection design in my own project?

Yes, under the terms of its MIT license, which capopaul chose for the repository.

Can I test firmware for the Toxic-Detection without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards