2 open source boards using the AZ1084CD-3.3TRG1
Real designs built with the AZ1084CD-3.3TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP323d printer
Angelo13C
102 × 102 mm91 parts4LNo license2
Mux
hrl-labs-clinic-24-25
214 × 36 mm73 parts2LNo license1
The AZ1084CD-3.3TRG1 in open source designs
The gallery holds 2 open source boards using the AZ1084CD-3.3TRG1 from 2 GitHub repositories; a typical one measures about 158 × 69 mm and carries around 82 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is 3d printer by Angelo13C.
Microcontrollers on boards using the AZ1084CD-3.3TRG1
AZ1084CD-3.3TRG1: common questions
Where can I find a AZ1084CD-3.3TRG1 reference design?
Each of the 2 boards on this page is a real design using the AZ1084CD-3.3TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AZ1084CD-3.3TRG1 use?
Most are built on ESP32 (1).
How big is a typical board using the AZ1084CD-3.3TRG1?
The median is 158 × 69 mm, and 50% are two-layer designs.
What is the most popular open source board using the AZ1084CD-3.3TRG1?
By GitHub stars, 3d printer by Angelo13C, with 2 stars.
Can I simulate one of these boards using the AZ1084CD-3.3TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.