14 open source boards using the ESP32-WROOM-32E-N16
Real designs built with the ESP32-WROOM-32E-N16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SH-ESP32
hatlabs
89 × 58 mm172 parts4LCC-BY-4.049ESP32
Uberamp1
DeepSOIC
130 × 82 mm520 parts2LNo license3ESP32
Eikgeiger
fredriknk
116 × 31 mm85 parts2LMIT3ESP32
SHIO88W
csabaala
98.5 × 76.5 mm94 parts2LGPL-3.01ESP32
Toxic-Detection
capopaul
120 × 65 mm181 parts4LMIT0ESP32
02 13 26
OSHE-Github
80.5 × 84 mm101 parts2LNo license0ESP32
Mstd
xvrxvr
96 × 96.3 mm88 parts4LMIT0ESP32
Mini car
jegor377
65 × 65 mm85 parts4LNo license0ESP32
Portero bot hardware
Willis75
117.5 × 104.5 mm71 parts2LNo license0ESP32
Smart projector remote
benceharomi
30 × 60 mm24 parts2LMIT0- schematic only · 125 partsESP32
Allspice ee review
markomij12
125 partsMIT0 ESP32
02 11 26
OSHE-Github
196 × 190 mm100 parts2LNo license0ESP32
Plant Saver Kicad V2
OSHE-Github
82 × 85 mm97 parts2LNo license0ESP32
RC-5 Remote Controler
bismarx-v1
40 × 59.8 mm11 parts2LNo license5
How designs wire the ESP32-WROOM-32E-N16
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ESP32-WROOM-32E-N16 connects to, and the resistors, capacitors and other passives placed on it.
- The SWP/SD3 pin is left unconnected on 11 of 11 designs.
- The SCS/CMD pin is left unconnected on 11 of 11 designs.
- The SCK/CLK pin is left unconnected on 11 of 11 designs.
- The SDO/SD0 pin is left unconnected on 11 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 15, 38, 39 | Connected to: GND 95% | — |
| VDDpin 2 | Connected to: 3.3V 91% |
|
| ENpin 3 | Connected to: Signal 91% |
|
| NCpin 17, 32 | Connected to: Not connected 100% | — |
| SWP/SD3pin 18 | Connected to: Not connected 100% | — |
| SCS/CMDpin 19 | Connected to: Not connected 100% | — |
| SCK/CLKpin 20 | Connected to: Not connected 100% | — |
| SDO/SD0pin 21 | Connected to: Not connected 100% | — |
| SDI/SD1pin 22 | Connected to: Not connected 100% | — |
| IO0pin 25 | Connected to: Signal 91% |
|
| IO21pin 33 | Connected to: A connector 50% · not connected 20% |
|
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SH-ESP32 by hatlabs, RC-5 Remote Controler by bismarx-v1, Uberamp1 by DeepSOIC and Eikgeiger by fredriknk.
The ESP32-WROOM-32E-N16 in open source designs
The gallery holds 14 open source boards using the ESP32-WROOM-32E-N16 from 12 GitHub repositories; a typical one measures about 96 × 76.4 mm and carries around 96 components.
69% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is SH-ESP32 by hatlabs.
Parts used alongside the ESP32-WROOM-32E-N16
Microcontrollers on boards using the ESP32-WROOM-32E-N16
What boards using the ESP32-WROOM-32E-N16 are built for
ESP32-WROOM-32E-N16: common questions
Where can I find a ESP32-WROOM-32E-N16 reference design?
Each of the 14 boards on this page is a real design using the ESP32-WROOM-32E-N16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-WROOM-32E-N16 SWP/SD3 pin connected?
The SWP/SD3 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-WROOM-32E-N16.
How is the ESP32-WROOM-32E-N16 SCS/CMD pin connected?
The SCS/CMD pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-WROOM-32E-N16.
How is the ESP32-WROOM-32E-N16 SCK/CLK pin connected?
The SCK/CLK pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-WROOM-32E-N16.
Which microcontrollers do boards using the ESP32-WROOM-32E-N16 use?
Most are built on ESP32 (14).
How big is a typical board using the ESP32-WROOM-32E-N16?
The median is 96 × 76.4 mm, and 69% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32E-N16?
By GitHub stars, SH-ESP32 by hatlabs, with 49 stars.
Can I simulate one of these boards using the ESP32-WROOM-32E-N16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.