Wallet mp3-player
CaptainCookie14·wallet-mp3-player·PCB project (kicad)/THIS IS GOOD COPY.kicad_pcb
About the Wallet mp3-player PCB
Wallet mp3-player is an open source STM32 PCB design by CaptainCookie14, published on GitHub. It is a 2-layer board measuring 54 × 85 mm, with 68 components from 27 distinct parts.
Its main chip is the STM32F411CEUX, from the STM32 family. Other key parts include the AMS1117, USBLC6-2SC6, PCM5102A and TPA6132A2RTE. By type, the board carries 34 capacitors, 15 resistors, 6 switches, 5 ICs, 4 connectors and 2 diodes.
It belongs with the audio and power & battery designs in this gallery.
From the project
This project is a compact, portable MP3 player designed to fit roughly the size of a credit card. It focuses on minimal power usage, small PCB design, and simple user controls for playing music from onboard or external storage.
HOW TO USE IT Insert a micro SD card containing MP3 or WAV files into the device. Turn it on using the battery and play the songs using the buttons. It does not require a phone or computer to play songs. Users can play, pause, and skip songs, and also change the volume using the buttons.
Plays MP3 audio files Ultra-compact PCB design (credit card sized) Button-based controls (play/pause, next, previous, volume) Supports microSD storage for music files Low power consumption for portable devices Optional output for headphones or small speakers
Main components on the Wallet mp3-player
Wallet mp3-player bill of materials (BOM)
68 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F411CEUX STM32F411CEUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | AMS1117 | SOT-223-3_TabPin2 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | TPA6132A2RTE | WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U5 |
| 1 | 16MHZ 16mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Micro_SD_Card | TF-01A | J2 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J4 |
| 1 | AUDIOJACK3 AudioJack3 | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J5 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 5 | SW_Push | SW_Push_1P1T_XKB_TS-1187A | SW2, SW3, SW4, SW5, SW6 |
| 2 | LED | LED_0805_2012Metric | D1, D2 |
| 1 | 120 ohms @ 100 mhz | L_0603_1608Metric | FB1 |
| 12 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C12, C13, C14, C16, C18 +4 |
| 5 | 10U 10u | C_0805_2012Metric | C4, C15, C17, C19, C32 |
| 1 | 10N 10n | C_0402_1005Metric | C5 |
| 6 | 1UF 1uf | C_0402_1005Metric | C6, C7, C24, C25, C30, C31 |
| 2 | 10P 10p | C_0402_1005Metric | C8, C9 |
| 2 | 22U 22u | C_0805_2012Metric | C10, C11 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2U2 2u2 | C_0402_1005Metric | C23, C26, C27, C43 |
| 2 | 2.2N 2.2n | C_0402_1005Metric | C44, C45 |
| 7 | 10K 10k | R_0402_1005Metric | R1, R4, R5, R6, R7, R9, R10 |
| 2 | 1.5k ohm | R_0402_1005Metric | R2, R3 |
| 2 | 450 | R_0402_1005Metric | R11, R12 |
| 2 | 10OHM 10ohm | R_0402_1005Metric | R13, R14 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R15, R16 |
Wallet mp3-player design files
The KiCad project lives in the CaptainCookie14/wallet-mp3-player repository on GitHub; these links point at the commit this page was built from.
Wallet mp3-player: common questions
What microcontroller does the Wallet mp3-player use?
The Wallet mp3-player is built around the STM32F411CEUX, from the STM32 family.
How big is the Wallet mp3-player PCB?
The Wallet mp3-player measures 54 × 85 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Wallet mp3-player?
68 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wallet mp3-player design files?
From the CaptainCookie14/wallet-mp3-player repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wallet mp3-player design in my own project?
The repository has no license, so all rights stay with CaptainCookie14. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wallet mp3-player without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k