12 open source boards using the TPA6132A2RTE

Real designs built with the TPA6132A2RTE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the TPA6132A2RTE

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TPA6132A2RTE connects to, and the resistors, capacitors and other passives placed on it.

  • The CPN_9 pin has a series capacitor on 12 of 12 designs, most often 1 µF.
  • The CPP_11 pin has a series capacitor on 12 of 12 designs, most often 1 µF.
  • The HPVSS_8 pin has a capacitor to GND on 11 of 12 designs, most often 1 µF (then 2.2 µF).
  • The HPVDD_12 pin has a capacitor to GND on 10 of 12 designs, most often 2.2 µF (then 100 nF).
INL-_1pin 1Connected to: Signal 75% · GND 25%
  • Series capacitor on 58% · 1 µF (7)
INL+_2pin 2Connected to: Signal 58% · GND 42%
  • Series capacitor on 33% · 2.2 µF (2), 1 µF (2), 2.2 nF (2)
INR+_3pin 3Connected to: Signal 58% · GND 42%
  • Series capacitor on 33% · 2.2 µF (2), 1 µF (2), 2.2 nF (2)
INR-_4pin 4Connected to: Signal 75% · GND 25%
  • Series capacitor on 58% · 1 µF (7)
HPVSS_8pin 8Connected to: Signal 100%
  • Capacitor to GND on 92% · 1 µF (10), 2.2 µF (1)
CPN_9pin 9Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (12)
PGND_10pin 10Connected to: GND 92%
CPP_11pin 11Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (12)
HPVDD_12pin 12Connected to: Signal 92%
  • Capacitor to GND on 83% · 2.2 µF (9), 100 nF (3), 10 µF (1)
VDD_14pin 14Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 67% · 100 nF (6), 2.2 µF (5), 10 µF (3)
SGND_15pin 15Connected to: GND 83% · a signal 17%
EP_17pin 17Connected to: GND 83%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sonatino by luminationlabs, OpenIEMA by aaravjhamb, 5V PCM5102 interface for Raspberry PI (PLL Operation) by 6r1d and Akash-Chowa-DX by Hasnat4763.

The TPA6132A2RTE in open source designs

The gallery holds 12 open source boards using the TPA6132A2RTE from 12 GitHub repositories; a typical one measures about 60.5 × 70.4 mm and carries around 59 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Sonatino by luminationlabs.

Microcontrollers on boards using the TPA6132A2RTE

TPA6132A2RTE: common questions

Where can I find a TPA6132A2RTE reference design?

Each of the 12 boards on this page is a real design using the TPA6132A2RTE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPA6132A2RTE CPN_9 pin connected?

The CPN_9 pin has a series capacitor on 12 of 12 designs, most often 1 µF. Counted from the KiCad layouts of 12 open source designs using the TPA6132A2RTE.

How is the TPA6132A2RTE CPP_11 pin connected?

The CPP_11 pin has a series capacitor on 12 of 12 designs, most often 1 µF. Counted from the KiCad layouts of 12 open source designs using the TPA6132A2RTE.

How is the TPA6132A2RTE HPVSS_8 pin connected?

The HPVSS_8 pin has a capacitor to GND on 11 of 12 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 12 open source designs using the TPA6132A2RTE.

What parts are used alongside the TPA6132A2RTE?

The PCM5102A, USBLC6-2SC6, AP2112K-3.3, MAX98357A and MCP73831-2-OT appear in the most repositories here.

Which microcontrollers do boards using the TPA6132A2RTE use?

Most are built on ESP32 (3), STM32 (3), RP2040/RP2350 (2) and Nordic nRF (1).

How big is a typical board using the TPA6132A2RTE?

The median is 60.5 × 70.4 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPA6132A2RTE?

By GitHub stars, Sonatino by luminationlabs, with 39 stars.

Can I simulate one of these boards using the TPA6132A2RTE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part