83 open source boards using the PCM5102A

Real designs built with the PCM5102A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

83 boardsClear filters|Most starred

How designs wire the PCM5102A

Read from the KiCad layouts of 61 open source designs, one per repository: what each pin of the PCM5102A connects to, and the resistors, capacitors and other passives placed on it.

  • The CAPP pin has a series capacitor on 51 of 60 designs, most often 2.2 µF (then 2.2 nF).
  • The CAPM pin has a series capacitor on 50 of 60 designs, most often 2.2 µF (then 2.2 nF).
  • The OUTL pin has a series resistor on 48 of 60 designs, most often 470 Ω (then 10 kΩ).
  • The LDOO pin has a capacitor to GND on 48 of 57 designs, most often 100 nF (then 10 µF).
CPVDDpin 1Connected to: 3.3V 77% · a signal 18%
  • Decoupling capacitor on 60% · 100 nF (48), 10 µF (32), 1 µF (5)
CAPPpin 2Connected to: Signal 93%
  • Series capacitor on 85% · 2.2 µF (44), 2.2 nF (2), 10 µF (2)
CPGNDpin 3Connected to: GND 85%
CAPMpin 4Connected to: Signal 92%
  • Series capacitor on 83% · 2.2 µF (44), 2.2 nF (2), 10 µF (2)
VNEGpin 5Connected to: Signal 88%
  • Capacitor to GND on 78% · 2.2 µF (37), 10 µF (5), 1 µF (4)
OUTLpin 6Connected to: Signal 95%
  • Series resistor on 80% · 470 Ω (37), 10 kΩ (5), 24 kΩ (1)
OUTRpin 7Connected to: Signal 95%
  • Series resistor on 78% · 470 Ω (36), 10 kΩ (5), 1 kΩ (2)
AVDDpin 8Connected to: 3.3V 75% · a signal 22%
  • Decoupling capacitor on 67% · 100 nF (56), 10 µF (33), 1 µF (4)
AGNDpin 9Connected to: GND 90%
DEMPpin 10Connected to: GND 80% · a signal 19%
FLTpin 11Connected to: GND 76% · a signal 22%
FMTpin 16Connected to: GND 81% · a signal 18%
LDOOpin 18Connected to: Signal 89%
  • Capacitor to GND on 84% · 100 nF (41), 10 µF (31), 1 µF (5)
DGNDpin 19Connected to: GND 93%
DVDDpin 20Connected to: 3.3V 82% · a signal 16%
  • Decoupling capacitor on 63% · 100 nF (39), 10 µF (23), 1 µF (4)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Carte FX 0 by PhysicsDptAngers, 4HPico by rheslip, ESP32AY-revD by djspawnbrest and JPL.mp3 by jpetkauskas.

The PCM5102A in open source designs

The gallery holds 83 open source boards using the PCM5102A from 68 GitHub repositories; a typical one measures about 89.7 × 85 mm and carries around 77 components.

59% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.

The most starred is Carte FX 0 by PhysicsDptAngers.

Microcontrollers on boards using the PCM5102A

PCM5102A: common questions

Where can I find a PCM5102A reference design?

Each of the 83 boards on this page is a real design using the PCM5102A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCM5102A CAPP pin connected?

The CAPP pin has a series capacitor on 51 of 60 designs, most often 2.2 µF (then 2.2 nF). Counted from the KiCad layouts of 61 open source designs using the PCM5102A.

How is the PCM5102A CAPM pin connected?

The CAPM pin has a series capacitor on 50 of 60 designs, most often 2.2 µF (then 2.2 nF). Counted from the KiCad layouts of 61 open source designs using the PCM5102A.

What resistor goes on the PCM5102A OUTL pin?

The OUTL pin has a series resistor on 48 of 60 designs, most often 470 Ω (then 10 kΩ). Counted from the KiCad layouts of 61 open source designs using the PCM5102A.

What parts are used alongside the PCM5102A?

The AMS1117-3.3, AP2112K-3.3, ESP32-S3-WROOM-1, TP4056 and RP2040 appear in the most repositories here.

Which microcontrollers do boards using the PCM5102A use?

Most are built on ESP32 (35), RP2040/RP2350 (19), NXP (7) and STM32 (4).

How big is a typical board using the PCM5102A?

The median is 89.7 × 85 mm, and 59% are two-layer designs.

What is the most popular open source board using the PCM5102A?

By GitHub stars, Carte FX 0 by PhysicsDptAngers, with 87 stars.

Can I simulate one of these boards using the PCM5102A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part