Flipped
carebare47·modular-synth·vca/thomas-henry-vca/vca1/output/flipped.kicad_pcb
About the Flipped PCB
Flipped is an open source PCB design by carebare47, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 92.5 × 52.8 mm, with 47 components from 26 distinct parts.
Other key parts include the CA3080, TL072 and TL071. By type, the board carries 23 resistors, 8 connectors, 8 capacitors, 3 ICs, 3 switches and 1 transistor.
It belongs with the audio designs in this gallery.
From the project
Repository for the ((very) long term) modular synth project
So far the only module that has been routed is the thomas-henry vca1.
Main components on the Flipped
Flipped bill of materials (BOM)
47 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CA3080 | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | TL072 | DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | TL071 | DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | 2N3906 | TO-92_Wide | Q1 |
| 5 | AudioJack2 | PinHeader_1x02_P2.54mm_Vertical_audio | J1, J2, J3, J4, J5 |
| 1 | MAX OUT | PinHeader_1x02_P2.54mm_Vertical_audio | J6 |
| 1 | LINE OUT | PinHeader_1x02_P2.54mm_Vertical_audio | J7 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 3 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3 |
| 1 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 10pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 22pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 3 | 0.22uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C9 |
| 1 | 2.2uF NP | CP_Radial_D8.0mm_P3.50mm | C12 |
| 2 | 10uF | CP_Radial_D6.3mm_P2.50mm | C13, C14 |
| 1 | 22r | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 8 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R9, R12, R13, R14, R15, R16 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 10K | PinHeader_1x03_P2.54mm_Vertical | R4-LEVEL1 |
| 2 | 11k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 51k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 100k | Potentiometer_Piher_PT-6-V_Vertical | R17-OFFSET-TRIM1 |
| 5 | 100K | PinHeader_1x03_P2.54mm_Vertical | R18-PAD1, R19-PAD2, R20-PAD3, R21-ATTEN1, R22-INITIAL1 |
| 1 | 330k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
Flipped design files
The KiCad project lives in the carebare47/modular-synth repository on GitHub; these links point at the commit this page was built from.
Flipped: common questions
How big is the Flipped PCB?
The Flipped measures 92.5 × 52.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flipped?
47 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flipped design files?
From the carebare47/modular-synth repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Flipped design in my own project?
Yes, under the terms of its GPL-3.0 license, which carebare47 chose for the repository.
More boards in modular-synth
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687