Whistler mic array
ccc909·Whistler·mic-array/whistler-mic-array.kicad_pcb
About the Whistler mic array PCB
Whistler mic array is an open source PCB design by ccc909, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 200 × 200 mm, with 83 components from 13 distinct parts.
Other key parts include the TPS7A2018PDBVR and 74LVC125. By type, the board carries 41 capacitors, 21 resistors, 16 microphones, 2 ICs, 1 connector and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Open-source 16-channel USB MEMS microphone array: KiCad PCB design, XMOS XU316 (xcore.ai) USB Audio Class 2 firmware with DFU, BOM and JLCPCB-ready production files. CERN-OHL-S.
Whistler is an open-source 16-channel circular MEMS microphone array. It plugs into a computer over USB-C and works as a standard USB Audio Class 2 (UAC2) microphone, with no drivers to install. An XMOS XU316 (xcore.ai) captures the 16 PDM microphones and streams them at 48 kHz. This repository has the KiCad PCB design files, a BOM and JLCPCB production files, and the firmware.

Main components on the Whistler mic array
Whistler mic array bill of materials (BOM)
83 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A2018PDBVR | SOT-23-5 | U3 |
| 1 | 74LVC125 | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | CONN_01X24 Conn_01x24 | Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J19 |
| 16 | IM72D128 IM72D128V01XTMA1 Infineon Technologies | MIC_IM72D128V01XTMA1 | MK1, MK2, MK3, MK4, MK5, MK6, MK7, MK8 +8 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 1 | 680R | C_0402_1005Metric | FB11 |
| 17 | 100NF 100nF | C_0402_1005Metric | C1, C12, C14, C16, C18, C20, C22, C24 +9 |
| 19 | 1UF 1uF | C_0402_1005Metric | C2, C3, C4, C11, C13, C15, C17, C19 +11 |
| 1 | 10UF 10uF | C_0603_1608Metric | C5 |
| 4 | 4.7UF 4.7uF | C_0603_1608Metric | C6, C7, C8, C9 |
| 4 | 22R | R_0402_1005Metric | R1, R2, R3, R4 |
| 1 | 470R | R_0402_1005Metric | R5 |
| 16 | 33R | R_0402_1005Metric | R6, R7, R8, R9, R10, R11, R12, R13 +8 |
Whistler mic array design files
The KiCad project lives in the ccc909/Whistler repository on GitHub; these links point at the commit this page was built from.
Whistler mic array: common questions
How big is the Whistler mic array PCB?
The Whistler mic array measures 200 × 200 mm, has 2 copper layers and is 2 mm thick.
How many components are on the Whistler mic array?
83 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Whistler mic array design files?
From the ccc909/Whistler repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Whistler mic array design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which ccc909 chose for the repository.
More boards in Whistler
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687