9 open source boards using the TPS7A2018PDBVR
Real designs built with the TPS7A2018PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1K band fmcw radar
HearnChristian
66 × 46 mm99 parts4LNo license1Silicon Labs
Stillpoint
techmiguel
60 × 60 mm74 parts4LCERN-OHL-S-2.01ESP32
Esp32 s3 dwm3000 uwb anchor with relay outputs
Takingo
160 × 100 mm322 parts4LNo license0Betr kicad resources
TheUnknownAlias
56.6 × 39 mm85 parts4LCustom license0Whistler mic array
ccc909
200 × 200 mm83 parts2LCERN-OHL-S-2.00Quantum mind uwb rtls anchor v3 0
Takingo
220 × 140 mm193 parts4LNo license0Quantum mind uwb rtls anchor v3 0 fr224 java25 test
Takingo
220 × 140 mm193 parts4LNo license0Quantum mind uwb rtls anchor v3 0 fr224 test
Takingo
220 × 140 mm193 parts4LNo license0
How designs wire the TPS7A2018PDBVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS7A2018PDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The IN_1 pin is tied to 3.3V on 6 of 6 designs.
- The NC_4 pin is left unconnected on 6 of 6 designs.
- The EN_3 pin is tied to 5V on 5 of 6 designs.
- The OUT_5 pin is tied to 1.8V on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN_1pin 1 | Connected to: 3.3V 100% | — |
| GND_2pin 2 | Connected to: GND 100% | — |
| EN_3pin 3 | Connected to: 5V 83% · a signal 17% | — |
| NC_4pin 4 | Connected to: Not connected 100% | — |
| OUT_5pin 5 | Connected to: 1.8V 83% · a signal 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include K band fmcw radar by HearnChristian, StratosCore by pantojinho, Stillpoint by techmiguel and Whistler mic array by ccc909.
The TPS7A2018PDBVR in open source designs
The gallery holds 9 open source boards using the TPS7A2018PDBVR from 6 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 193 components.
89% use four copper layers or more, and 22% carry an open source license.
The most starred is StratosCore by pantojinho.
Microcontrollers on boards using the TPS7A2018PDBVR
What boards using the TPS7A2018PDBVR are built for
TPS7A2018PDBVR: common questions
Where can I find a TPS7A2018PDBVR reference design?
Each of the 9 boards on this page is a real design using the TPS7A2018PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS7A2018PDBVR IN_1 pin connected?
The IN_1 pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPS7A2018PDBVR.
How is the TPS7A2018PDBVR NC_4 pin connected?
The NC_4 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPS7A2018PDBVR.
How is the TPS7A2018PDBVR EN_3 pin connected?
The EN_3 pin is tied to 5V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPS7A2018PDBVR.
Which microcontrollers do boards using the TPS7A2018PDBVR use?
Most are built on ESP32 (1), RP2040/RP2350 (1) and Silicon Labs (1).
How big is a typical board using the TPS7A2018PDBVR?
The median is 160 × 100 mm, and 11% are two-layer designs.
What is the most popular open source board using the TPS7A2018PDBVR?
By GitHub stars, StratosCore by pantojinho, with 1 stars.
Can I simulate one of these boards using the TPS7A2018PDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.