CellKeeper Precharge
cellkeeper-bms·cellkeeper-hardware·Precharge/Precharge.kicad_pcb
About the CellKeeper Precharge PCB
CellKeeper Precharge is an open source PCB design by cellkeeper-bms, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 44 × 73.2 mm, with 6 components from 1 distinct parts.
It belongs with the power & battery designs in this gallery.
From the project
PCB for the CellKeeper BMS
KiCad PCB design for the CellKeeper Battery Management System, a replacement BMS controller for battery packs using the isoSPI protocol. The main board fits the Tesla battery's penthouse: the pack's original harness, HV sense, shunt and BMB connectors plug into it, and it mounts on the original brackets.
Each ordered revision has a release with its Gerbers, JLCPCB BOM and CPL, schematic PDF, board PDF (3D views and 1:1 prints) and the enclosure print files. Rev 1.1 was ordered on 2026-10-28; work towards rev 1.2 is on the rev1.2 branch.

CellKeeper Precharge bill of materials (BOM)
6 components, 1 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | B59451C1130B070 | BMS_Library__RV_Disc_D15.5mm_W7.5mm_P5.0mm | TH1, TH2, TH3, TH4, TH5, TH6 |
CellKeeper Precharge design files
The KiCad project lives in the cellkeeper-bms/cellkeeper-hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutPrecharge/Precharge.kicad_pcb
- SchematicPrecharge/Precharge.kicad_sch
CellKeeper Precharge: common questions
How big is the CellKeeper Precharge PCB?
The CellKeeper Precharge measures 44 × 73.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CellKeeper Precharge?
6 components, from 1 distinct parts. The full bill of materials is listed on this page.
Where can I download the CellKeeper Precharge design files?
From the cellkeeper-bms/cellkeeper-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CellKeeper Precharge design in my own project?
Yes, under the terms of its GPL-3.0 license, which cellkeeper-bms chose for the repository.
More boards in cellkeeper-hardware
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k