ESP8266 Promaster Interface

CF209·kicad·ESP8266_Promaster_Interface/ESP8266_Promaster_Interface.kicad_pcb

ESP8266 Promaster Interface PCB layout, top view — open source ESP32 board by CF209

About the ESP8266 Promaster Interface PCB

ESP8266 Promaster Interface is an open source ESP32 PCB design by CF209, published on GitHub. It is a 4-layer board measuring 54.1 × 54.1 mm, with 62 components from 21 distinct parts.

Its main chip is the ESP-WROOM-02D_M1102H3200PH3Q0_, from the ESP32 family. Other key parts include the AP6502SP-13. By type, the board carries 27 resistors, 15 capacitors, 12 transistors, 4 connectors, 2 ICs and 1 switch.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

ESP8266WaterSensor - This PCB uses an ESP8266 to make an IOT device with 3 functions: 1) Reads the resistance from a water level sensor to determine how full a water tank is 2) Has a header to connect an MPU6050 accelerometer 3) Can control WS2811 light strips - The PCB is powere

ESP8266WaterSensor - This PCB uses an ESP8266 to make an IOT device with 3 functions: 1) Reads the resistance from a water level sensor to determine how full a water tank is 2) Has a header to connect an MPU6050 accelerometer 3) Can control WS2811 light strips - The PCB is powered by 12V and uses a buck converter to step it down to 3.3V for the ESP8266 and the MPU6050 - The ESP8266 communicates to Home Assistant running on a Raspberry Pi over WIFI - Designed to fit in the 1551TFLGY plastic enclosure

Main components on the ESP8266 Promaster Interface

ESP-WROOM-02D_M1102H3200PH3Q0_AP6502SP-13

ESP8266 Promaster Interface bill of materials (BOM)

62 components, 21 distinct parts.

QtyPartRefs
1
ESP-WROOM-02D_M1102H3200PH3Q0_
U1
1
AP6502SP-13
U2
12
Q_NMOS_GSD
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +4
1
Conn_01x02_Male
J1
1
691137710002
J2
1
1984675
J3
1
Conn_01x06_Female
J5
1
LL3301NF065QG
S1
1
NRS6045T100MMGK
L1
1
.1uF
C1
3
22uF
C2, C4, C11
1
10nF
C3
3
10uF
C5, C12, C13
4
0.1uF
C6, C8, C9, C10
1
6.8nF
C7
2
100uF
C14, C15
1
26.1k
R1
23
10k
R2, R3, R5, R6, R7, R9, R10, R11 +15
1
6.8k
R4
1
DNS
R8
Show 1 more
QtyPartRefs
1
100k
R25

ESP8266 Promaster Interface design files

The KiCad project lives in the CF209/kicad repository on GitHub; these links point at the commit this page was built from.

ESP8266 Promaster Interface: common questions

What microcontroller does the ESP8266 Promaster Interface use?

The ESP8266 Promaster Interface is built around the ESP-WROOM-02D_M1102H3200PH3Q0_, from the ESP32 family.

How big is the ESP8266 Promaster Interface PCB?

The ESP8266 Promaster Interface measures 54.1 × 54.1 mm, has 4 copper layers and is 1.6002 mm thick.

How many components are on the ESP8266 Promaster Interface?

62 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP8266 Promaster Interface design files?

From the CF209/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ESP8266 Promaster Interface design in my own project?

The repository has no license, so all rights stay with CF209. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP8266 Promaster Interface without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in kicad

Similar boards