ESP8266 Water Sensor
CF209·kicad·ESP8266_Water_Sensor/ESP8266_Water_Sensor.kicad_pcb
About the ESP8266 Water Sensor PCB
ESP8266 Water Sensor is an open source ESP32 PCB design by CF209, published on GitHub. It is a 4-layer board measuring 54.1 × 54.1 mm, with 34 components from 18 distinct parts.
Its main chip is the ESP-WROOM-02D_M1102H3200PH3Q0_, from the ESP32 family. Other key parts include the AP6502SP-13. By type, the board carries 15 capacitors, 9 resistors, 5 connectors, 2 ICs, 2 switches and 1 inductor.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
ESP8266WaterSensor - This PCB uses an ESP8266 to make an IOT device with 3 functions: 1) Reads the resistance from a water level sensor to determine how full a water tank is 2) Has a header to connect an MPU6050 accelerometer 3) Can control WS2811 light strips - The PCB is powere
ESP8266WaterSensor - This PCB uses an ESP8266 to make an IOT device with 3 functions: 1) Reads the resistance from a water level sensor to determine how full a water tank is 2) Has a header to connect an MPU6050 accelerometer 3) Can control WS2811 light strips - The PCB is powered by 12V and uses a buck converter to step it down to 3.3V for the ESP8266 and the MPU6050 - The ESP8266 communicates to Home Assistant running on a Raspberry Pi over WIFI - Designed to fit in the 1551TFLGY plastic enclosure
Main components on the ESP8266 Water Sensor
ESP8266 Water Sensor bill of materials (BOM)
34 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-WROOM-02D_M1102H3200PH3Q0_ | ESPWROOM02DM1102H3200PH3Q0 | U1 |
| 1 | AP6502SP-13 | SOIC127P600X150-8N | U2 |
| 2 | Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | J1, J5 |
| 2 | 691137710002 | SHDR2W70P0X500_1X2_1000X750X1160P | J2, J4 |
| 1 | 691137710003 | 691137710003 | J3 |
| 2 | LL3301NF065QG | LL3301NF065QG | S1, S2 |
| 1 | NRS6045T100MMGK | NRS6045T101MMGKV | L1 |
| 1 | .1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 3 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C11 |
| 1 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C13 |
| 5 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C8, C9, C10, C12 |
| 1 | 6.8nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 2 | 100uF | CP_Radial_D6.3mm_P2.50mm | C14, C15 |
| 1 | 26.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 6 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R5, R6, R7, R8 |
| 1 | 6.8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
ESP8266 Water Sensor design files
The KiCad project lives in the CF209/kicad repository on GitHub; these links point at the commit this page was built from.
ESP8266 Water Sensor: common questions
What microcontroller does the ESP8266 Water Sensor use?
The ESP8266 Water Sensor is built around the ESP-WROOM-02D_M1102H3200PH3Q0_, from the ESP32 family.
How big is the ESP8266 Water Sensor PCB?
The ESP8266 Water Sensor measures 54.1 × 54.1 mm, has 4 copper layers and is 1.6002 mm thick.
How many components are on the ESP8266 Water Sensor?
34 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP8266 Water Sensor design files?
From the CF209/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ESP8266 Water Sensor design in my own project?
The repository has no license, so all rights stay with CF209. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP8266 Water Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in kicad
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k