ESP32 12v Relay

CF209·kicad·ESP32_12v_Relay/ESP32_12v_Relay.kicad_pcb

ESP32 12v Relay PCB layout, top view — open source ESP32 board by CF209

About the ESP32 12v Relay PCB

ESP32 12v Relay is an open source ESP32 PCB design by CF209, published on GitHub. It is a 4-layer board measuring 54.1 × 54.1 mm, with 47 components from 24 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-H4, from the ESP32 family. Other key parts include the DMN2029USD-13 and AP6502SP-13. By type, the board carries 14 capacitors, 13 resistors, 6 connectors, 5 diodes, 4 ICs and 1 fuse.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

ESP8266WaterSensor - This PCB uses an ESP8266 to make an IOT device with 3 functions: 1) Reads the resistance from a water level sensor to determine how full a water tank is 2) Has a header to connect an MPU6050 accelerometer 3) Can control WS2811 light strips - The PCB is powere

ESP8266WaterSensor - This PCB uses an ESP8266 to make an IOT device with 3 functions: 1) Reads the resistance from a water level sensor to determine how full a water tank is 2) Has a header to connect an MPU6050 accelerometer 3) Can control WS2811 light strips - The PCB is powered by 12V and uses a buck converter to step it down to 3.3V for the ESP8266 and the MPU6050 - The ESP8266 communicates to Home Assistant running on a Raspberry Pi over WIFI - Designed to fit in the 1551TFLGY plastic enclosure

Main components on the ESP32 12v Relay

DMN2029USD-13ESP32-C3-WROOM-02-H4AP6502SP-13

ESP32 12v Relay bill of materials (BOM)

47 components, 24 distinct parts.

QtyPartRefs
2
DMN2029USD-13
IC1, IC2
1
ESP32-C3-WROOM-02-H4
U1
1
AP6502SP-13
U2
5
691137710002
J1, J2, J3, J4, J6
1
Conn_01x06_Female
J5
1
5A
F1
1
Van_Graphic
G1
1
Jumper_2_Open
JP1
1
LL3301NF065QG
S1
4
FM4004W-W
D1, D2, D3, D4
1
LED
D5
1
NRS6045T100MMGK
L1
1
.1uF
C1
3
22uF
C2, C4, C11
1
10nF
C3
2
10uF
C5, C13
3
0.1uF
C6, C9, C10
1
6.8nF
C7
1
1uF
C8
2
100uF
C14, C15
Show 4 more
QtyPartRefs
1
26.1k
R1
10
10k
R2, R3, R5, R6, R7, R8, R9, R10 +2
1
6.8k
R4
1
66.5
R13

ESP32 12v Relay design files

The KiCad project lives in the CF209/kicad repository on GitHub; these links point at the commit this page was built from.

ESP32 12v Relay: common questions

What microcontroller does the ESP32 12v Relay use?

The ESP32 12v Relay is built around the ESP32-C3-WROOM-02-H4, from the ESP32 family.

How big is the ESP32 12v Relay PCB?

The ESP32 12v Relay measures 54.1 × 54.1 mm, has 4 copper layers and is 1.6002 mm thick.

How many components are on the ESP32 12v Relay?

47 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32 12v Relay design files?

From the CF209/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ESP32 12v Relay design in my own project?

The repository has no license, so all rights stay with CF209. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32 12v Relay without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in kicad

Similar boards