Inznierka
chajdaszf·inznierka
About the Inznierka PCB
Inznierka is an open source ESP32 PCB design by chajdaszf, published on GitHub. It is a board, with 15 components from 11 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 6 resistors, 3 capacitors, 2 ICs, 2 connectors and 2 switches.
It belongs with the audio and robotics & motion designs in this gallery.
From the project
inznierka
Rzeczywisty, edytowalny schemat KiCad 9.0.2, przygotowany na podstawie docs/input/BOMipolaczenia.xlsx i załączonego polecenia. Jest to projekt roboczy do przeglądu, a nie projekt dopuszczony do zamówienia PCB/PCBA.
Rozpakuj cały ZIP do jednego katalogu. W KiCad 9 otwórz SzafkaGlosowaSTM32ESP32.kicadpro, a następnie edytor schematów. Na stronie głównej wejdź do arkusza przez jego prostokąt. Zachowaj pliki potomne, Szafka.kicadsym i sym-lib-table` razem z projektem. Standardowe biblioteki footprintów KiCad 9 są potrzebne do ich przeglądania.
Main components on the Inznierka
Inznierka bill of materials (BOM)
15 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8 | ESP32-S3-WROOM-1 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U7 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | S6B-PH-SM4-TB(LF)(SN) | JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J8 |
| 2 | TS-1187A-B-A-B | SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | C0805X5R226M250NT 22uF 25V | C_0805_2012Metric | C10 |
| 1 | CC0603KRX7R9BB104 100nF 50V | C_0603_1608Metric | C14 |
| 1 | CL10A105KB8NNNC 1uF 50V | C_0603_1608Metric | C15 |
| 2 | RC0603FR-075K1L 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | RC0603FR-0710KL 10k | R_0603_1608Metric | R3, R4 |
| 2 | 0603WAJ0220T5E 22R | R_0603_1608Metric | R19, R20 |
Inznierka design files
The KiCad project lives in the chajdaszf/inznierka repository on GitHub; these links point at the commit this page was built from.
- SchematicESP32_USB_Audio.kicad_sch
- Netlistreports/netlist.xml
- BOMreports/PIN_NET_MAP.csv
Inznierka: common questions
What microcontroller does the Inznierka use?
The Inznierka is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.
How many components are on the Inznierka?
15 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Inznierka design files?
From the chajdaszf/inznierka repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the Inznierka design in my own project?
The repository has no license, so all rights stay with chajdaszf. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Inznierka without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k