HardLabs

CTC Ducky - based on RP Micro

challengethecyber·ctf-2023-badge·hardware/rp-micro.kicad_pcb

CTC Ducky - based on RP Micro PCB layout, top view — open source RP2040/RP2350 board by challengethecyber

About the CTC Ducky - based on RP Micro PCB

CTC Ducky - based on RP Micro is an open source RP2040/RP2350 PCB design by challengethecyber, published on GitHub under the MIT license. It is a 2-layer board measuring 89.2 × 99.8 mm, with 35 components from 17 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q64JVXGIQ and RT9013-33GB. By type, the board carries 16 capacitors, 9 resistors, 3 ICs, 2 switches, 1 crystal and 1 connector.

It belongs with the wearables designs in this gallery.

From the project

Badge related files for CTC 2023 CTF

- Custom PCB with RP2040 based on rp-micro project. - View IBOM

Main components on the CTC Ducky - based on RP Micro

RP2040W25Q64JVXGIQRT9013-33GB

CTC Ducky - based on RP Micro bill of materials (BOM)

35 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
W25Q64JVXGIQ
U2
1
RT9013-33GB
U3
1
12MHZ
12MHz
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
C269104
500mA, 6V
F1
1
C231329
BOOT
SW1
1
C231329
RESET
SW2
1
C72041
BLUE
LD1
1
B5817
D1
10
100NF
100nF
C1, C2, C5, C6, C8, C9, C10, C11 +2
2
20PF
20pF
C3, C4
4
1UF
1uF
C7, C13, C14, C16
2
27
R1, R2
3
1k
R3, R4, R9
2
10K
10k
R5, R8
2
5.1K
5.1k
R6, R7

CTC Ducky - based on RP Micro design files

The KiCad project lives in the challengethecyber/ctf-2023-badge repository on GitHub; these links point at the commit this page was built from.

CTC Ducky - based on RP Micro: common questions

What microcontroller does the CTC Ducky - based on RP Micro use?

The CTC Ducky - based on RP Micro is built around the RP2040, from the RP2040/RP2350 family.

How big is the CTC Ducky - based on RP Micro PCB?

The CTC Ducky - based on RP Micro measures 89.2 × 99.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CTC Ducky - based on RP Micro?

35 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CTC Ducky - based on RP Micro design files?

From the challengethecyber/ctf-2023-badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CTC Ducky - based on RP Micro design in my own project?

Yes, under the terms of its MIT license, which challengethecyber chose for the repository.

Can I test firmware for the CTC Ducky - based on RP Micro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ctf-2023-badge

Similar boards