Midi

cheezospheal·midi·hardware/midi.kicad_pcb

Midi PCB layout, top view — open source ESP32 board by cheezospheal

About the Midi PCB

Midi is an open source ESP32 PCB design by cheezospheal, published on GitHub. It is a 2-layer board measuring 144.1 × 124.5 mm, with 14 components from 7 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 diodes, 3 switches, 2 connectors, 1 IC and 1 resistor.

It belongs with the audio and displays & leds designs in this gallery.

From the project

A custom PCB designed to play melodies on a keypad, switch to different octaves, and includes a screen that shows what note you're playing!

While I've never been too interested in music (I'm very musically illiterate and got absolutely terrible marks in all of my music classes), I AM interested in hardware. I tried to make my MIDI very not-music-focused, or at least, very simple so even people like me can understand. A MIDI is essentially an instrument that that does not literally emit sound, but rather transmits to the computer what to play. It's also a little more complex than just a PCB with an OLED, so I get to use some more of my PCB designing skills and practice making something completely new! It being interactive as well…

Midi, from the project README
From the project README

Main components on the Midi

Midi bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
Capacitive Touch Buttons
J1
1
Conn_01x04_Pin
J2
2
R_Potentiometer_MountingPin
RV1, RV2
3
SW_Push
SW1, SW2, SW3
5
SK6812MINI-E
D1, D2, D3, D4, D5
1
330
R1

Midi design files

The KiCad project lives in the cheezospheal/midi repository on GitHub; these links point at the commit this page was built from.

Midi: common questions

What microcontroller does the Midi use?

The Midi is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the Midi PCB?

The Midi measures 144.1 × 124.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Midi?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Midi design files?

From the cheezospheal/midi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Midi design in my own project?

The repository has no license, so all rights stay with cheezospheal. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Midi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards