Starbie

cheezospheal·starbie-pcb

Starbie PCB layout, top view — open source ESP32 board by cheezospheal

About the Starbie PCB

Starbie is an open source ESP32 PCB design by cheezospheal, published on GitHub. It is a 2-layer board measuring 99.7 × 92.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

A compilation of all the files for the Starbie PCB project on Half Life!

Here is a screenshot of the finished product before I get into all the details:

The first step of creating Starbie was creating the schematic in KiCad's PCB Schematic editor. To see the schematic, open up the kicadsch file. In the schematic, there'll be some main parts: XIAO-ESP32-C3-SMD: The microcontroller of the project, interpreting and executing the code DHT11: A sensor for temperature and humidity for interactions with the pet R1 10k: A 10k Ohm resistor for the DHT11 Conn01x08Pin and Conn01x04Pin: A connector pin that links each pin to its matching circuit trace SW_Push: A…

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Starbie design files

The KiCad project lives in the cheezospheal/starbie-pcb repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 99.7 × 92.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the cheezospheal/starbie-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with cheezospheal. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards