HardLabs

Line Follower Robot 1782236633074

chestnutensign45875·test-deployment·backend/storage/pcb/Line_Follower_Robot_1782236633074.kicad_pcb

Line Follower Robot 1782236633074 PCB layout, top view — open source AVR/Arduino board by chestnutensign45875

About the Line Follower Robot 1782236633074 PCB

Line Follower Robot 1782236633074 is an open source AVR/Arduino PCB design by chestnutensign45875, published on GitHub. It is a 2-layer board measuring 200 × 130 mm, with 5 components from 5 distinct parts.

Its main chip is the Arduino Uno, from the AVR/Arduino family. Other key parts include the L298N, IR Sensor and 9V Battery. By type, the board carries 4 ICs and 1 module.

It belongs with the robotics & motion designs in this gallery.

Main components on the Line Follower Robot 1782236633074

Arduino UnoL298NIR Sensor9V Battery

Line Follower Robot 1782236633074 bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino Uno
MCU1
1
L298N
U2
1
IR Sensor
U3
1
9V Battery
U5
1
DC Motor
M4

Line Follower Robot 1782236633074 design files

The KiCad project lives in the chestnutensign45875/test-deployment repository on GitHub; these links point at the commit this page was built from.

Line Follower Robot 1782236633074: common questions

What microcontroller does the Line Follower Robot 1782236633074 use?

The Line Follower Robot 1782236633074 is built around the Arduino Uno, from the AVR/Arduino family.

How big is the Line Follower Robot 1782236633074 PCB?

The Line Follower Robot 1782236633074 measures 200 × 130 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Line Follower Robot 1782236633074?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Line Follower Robot 1782236633074 design files?

From the chestnutensign45875/test-deployment repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Line Follower Robot 1782236633074 design in my own project?

The repository has no license, so all rights stay with chestnutensign45875. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Line Follower Robot 1782236633074 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in test-deployment

Similar boards