HardLabs

IoT-Based Industrial Safety Monitoring System.

chestnutensign45875·test-deployment·backend/storage/pcb/IoT_Based_Industrial_Safety_Monitoring_System__1782239834589.kicad_pcb

IoT-Based Industrial Safety Monitoring System. PCB layout, top view — open source ESP32 board by chestnutensign45875

About the IoT-Based Industrial Safety Monitoring System. PCB

IoT-Based Industrial Safety Monitoring System. is an open source ESP32 PCB design by chestnutensign45875, published on GitHub. It is a 2-layer board measuring 200 × 130 mm, with 13 components from 12 distinct parts.

Its main chip is the ESP32, from the ESP32 family. Other key parts include the MQ-135 Gas Sensor –, Flame Sensor Module –, DHT11, OLED Display 0.96 I2C – and Buzzer –.

It belongs with the iot & wireless and displays & leds designs in this gallery.

Main components on the IoT-Based Industrial Safety Monitoring System.

ESP32MQ-135 Gas Sensor –Flame Sensor Module –DHT11OLED Display 0.96 I2C –Buzzer –Red LED –Green LED –220Ω Resistors –Breadboard –Jumper Wires – 20–305V Power Supply / Power Bank –

IoT-Based Industrial Safety Monitoring System. bill of materials (BOM)

13 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32
U1
1
MQ-135 Gas Sensor –
U2
1
Flame Sensor Module –
U3
1
DHT11
U4
1
OLED Display 0.96 I2C –
U5
1
Buzzer –
U6
1
Red LED –
U7
1
Green LED –
U8
2
220Ω Resistors –
U9, U10
1
Breadboard –
U11
1
Jumper Wires – 20–30
U12
1
5V Power Supply / Power Bank –
U13

IoT-Based Industrial Safety Monitoring System. design files

The KiCad project lives in the chestnutensign45875/test-deployment repository on GitHub; these links point at the commit this page was built from.

IoT-Based Industrial Safety Monitoring System.: common questions

What microcontroller does the IoT-Based Industrial Safety Monitoring System. use?

The IoT-Based Industrial Safety Monitoring System. is built around the ESP32, from the ESP32 family.

How big is the IoT-Based Industrial Safety Monitoring System. PCB?

The IoT-Based Industrial Safety Monitoring System. measures 200 × 130 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IoT-Based Industrial Safety Monitoring System.?

13 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IoT-Based Industrial Safety Monitoring System. design files?

From the chestnutensign45875/test-deployment repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IoT-Based Industrial Safety Monitoring System. design in my own project?

The repository has no license, so all rights stay with chestnutensign45875. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IoT-Based Industrial Safety Monitoring System. without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in test-deployment

Similar boards