HardLabs

Line Follower Robot 1781894152254

chestnutensign45875·test-deployment·backend/storage/pcb/Line_Follower_Robot_1781894152254.kicad_pcb

Line Follower Robot 1781894152254 PCB layout, top view — open source ESP32 board by chestnutensign45875

About the Line Follower Robot 1781894152254 PCB

Line Follower Robot 1781894152254 is an open source ESP32 PCB design by chestnutensign45875, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 6 components from 6 distinct parts.

Its main chip is the ESP32, from the ESP32 family. Other key parts include the L298N, IR Sensor, DHT11 and DC Motor.

It belongs with the robotics & motion designs in this gallery.

Main components on the Line Follower Robot 1781894152254

ESP32L298NIR SensorDHT11DC Motor

Line Follower Robot 1781894152254 bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32
Arduino Uno
U1
1
L298N
U2
1
IR Sensor
U3
1
DHT11
IR Sensor
U4
1
DC Motor
U5
1
DC Motor
U6

Line Follower Robot 1781894152254 design files

The KiCad project lives in the chestnutensign45875/test-deployment repository on GitHub; these links point at the commit this page was built from.

Line Follower Robot 1781894152254: common questions

What microcontroller does the Line Follower Robot 1781894152254 use?

The Line Follower Robot 1781894152254 is built around the ESP32, from the ESP32 family.

How big is the Line Follower Robot 1781894152254 PCB?

The Line Follower Robot 1781894152254 measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Line Follower Robot 1781894152254?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Line Follower Robot 1781894152254 design files?

From the chestnutensign45875/test-deployment repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Line Follower Robot 1781894152254 design in my own project?

The repository has no license, so all rights stay with chestnutensign45875. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Line Follower Robot 1781894152254 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in test-deployment

Similar boards