Line Follower Robot 1781891577923
About the Line Follower Robot 1781891577923 PCB
Line Follower Robot 1781891577923 is an open source ESP32 PCB design by chestnutensign45875, published on GitHub. It is a board, with 3 components from 3 distinct parts.
Its main chip is the ESP32, from the ESP32 family. Other key parts include the IR Sensor and L298N Motor Driver.
It belongs with the robotics & motion designs in this gallery.
Main components on the Line Follower Robot 1781891577923
Line Follower Robot 1781891577923 bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 Arduino Uno | DIP-8_W7.62mm | U1 |
| 1 | IR Sensor | DIP-12_W7.62mm | U2 |
| 1 | L298N Motor Driver | DIP-16_W7.62mm | U3 |
Line Follower Robot 1781891577923 design files
The KiCad project lives in the chestnutensign45875/test-deployment repository on GitHub; these links point at the commit this page was built from.
Line Follower Robot 1781891577923: common questions
What microcontroller does the Line Follower Robot 1781891577923 use?
The Line Follower Robot 1781891577923 is built around the ESP32, from the ESP32 family.
How many components are on the Line Follower Robot 1781891577923?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Line Follower Robot 1781891577923 design files?
From the chestnutensign45875/test-deployment repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Line Follower Robot 1781891577923 design in my own project?
The repository has no license, so all rights stay with chestnutensign45875. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Line Follower Robot 1781891577923 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in test-deployment
ESP32IoT-Based Industrial Safety Monitoring System.
200 × 130 mm13 parts2LNo license0
ESP32Line Follower Robot 1781894152254
100 × 80 mm6 parts2LNo license0
ESP32Line Follower Robot 1781893010643
6 partsNo license0
ESP32Line Follower Robot 1781893758273
100 × 80 mm6 parts2LNo license0
AVR/ArduinoLine Follower Robot 1782236633074
200 × 130 mm5 parts2LNo license0
AVR/ArduinoLine Follower Robot 1782236037926
200 × 130 mm5 parts2LNo license0
ESP32Line Follower Robot 1781891417941
3 partsNo license0
ESP32Line Follower Robot 1781891558804
3 partsNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k