Dodgeball
ChewbaccaBox·dodgeball·dodgeball/dodgeball.kicad_pcb
About the Dodgeball PCB
Dodgeball is an open source PCB design by ChewbaccaBox, published on GitHub. It is a 2-layer board, with 65 components from 52 distinct parts.
Other key parts include the 74HC74, 74LS08, 74HC04, 74LS93 and 74LS10. By type, the board carries 8 modules, 8 fuses, 8 diodes, 8 capacitors, 5 connectors and 3 ICs.
From the project
KiCAD re-implementation of a 1974 game called Dodgeball targeting the DICE emulator.
Main components on the Dodgeball
Dodgeball bill of materials (BOM)
65 components, 52 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | — | U1, U5, U6 | |
| 2 | 74HC74 | A5, A7 | |
| 1 | 74LS08 | A6 | |
| 1 | 74HC04 | A8 | |
| 1 | 74LS93 | A9 | |
| 1 | 74LS10 | A10 | |
| 1 | 74LS90 | A11 | |
| 1 | 7400 | M10 | |
| 1 | 74HC04 | J6 | |
| 1 | 74HC74 | J7 | |
| 1 | 74LS10 | J8 | |
| 1 | 7402 | J9 | |
| 1 | 74HC00 | P4 | |
| 3 | 74HC00 | B6, E7, E8 | |
| 1 | 74LS93 | B7 | |
| 2 | 74LS153 | B10, E10 | |
| 2 | 74LS90 | B11, E11 | |
| 2 | 74LS74 | E4, E5 | |
| 1 | 7402 | E6 | |
| 1 | 9312 | E9 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS08 | F4, F7 | |
| 1 | 74HC00 | F5 | |
| 1 | 74LS93 | F6 | |
| 1 | 7402 | F8 | |
| 1 | 74LS04 | F9 | |
| 1 | 74LS153 | F10 | |
| 1 | 74LS90 | F11 | |
| 1 | 74HC00 | H4 | |
| 2 | 74LS10 | H5, H8 | |
| 1 | 74LS93 | H6 | |
| 1 | 74LS86 | H7 | |
| 2 | 74LS74 | H9, H10 | |
| 1 | 74LS04 | H11 | |
| 1 | 7402 | K10 | |
| 1 | 74LS04 | K11 | |
| 1 | 7400 | D4 | |
| 2 | 74HC74 | D5, D8 | |
| 1 | 74HC00 | D6 | |
| 1 | 74LS107 | D7 | |
| 1 | 9312 | D9 | |
| 1 | 9322 | D10 | |
| 1 | 74LS90 | D11 | |
| 1 | 9602 | L9 | |
| 2 | 74LS74 | L10, L11 | |
| 1 | 74HC04 | C4 | |
| 1 | 74LS08 | C5 | |
| 1 | 7400 | C6 | |
| 1 | 74LS93 | C7 | |
| 1 | 74LS30 | C8 | |
| 1 | 74LS48 | C9 | |
| 1 | 74LS153 | C10 | |
| 1 | 74LS90 | C11 |
Dodgeball design files
The KiCad project lives in the ChewbaccaBox/dodgeball repository on GitHub; these links point at the commit this page was built from.
- Layoutdodgeball/dodgeball.kicad_pcb
- Schematicdodgeball/dodgeball.kicad_sch
Dodgeball: common questions
How big is the Dodgeball PCB?
The Dodgeball has 2 copper layers and is 1.6 mm thick.
How many components are on the Dodgeball?
65 components, from 52 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dodgeball design files?
From the ChewbaccaBox/dodgeball repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dodgeball design in my own project?
The repository has no license, so all rights stay with ChewbaccaBox. Use it as a reference, and ask the author before reusing the design.