10 open source boards using the 74LS93
Real designs built with the 74LS93, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Rosco m68k
rosco-m68k
160 × 100 mm74 partsBSD-3-Clause199Zenith zt1
misterblack1
221.5 × 149.5 mm140 parts2LNo license5Peoples permacomputer
genossen
208.3 × 146.1 mm121 parts2LCustom license2OSI-600D-SuperBoard-II
Bambelweeny57
301.5 × 367.4 mm292 parts2LNo license0Dodgeball
ChewbaccaBox
65 parts2LNo license0Clock circuit
bit4man
145.4 × 95.5 mm63 parts2LNo license0Fdc800jwd
codepainters
91 × 115.3 mm49 parts2LNo license0SintetizadorGuidoStolfi
ArqueologiaDigital
153.2 × 95.2 mm46 parts2LNo license0Z80PSG1
lynchaj
100 × 100 mm64 parts2LNo license31256 word memory
ibm2030
220 × 160 mm36 parts2LNo license13
How designs wire the 74LS93
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74LS93 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 is left unconnected on 9 of 9 designs.
- Pin 6 is left unconnected on 9 of 9 designs.
- Pin 7 is left unconnected on 9 of 9 designs.
- Pin 13 is left unconnected on 9 of 9 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 4 | Connected to: Not connected 100% | — |
| VCCpin 5 | Connected to: 5V 100% | — |
| Pin 6 | Connected to: Not connected 100% | — |
| Pin 7 | Connected to: Not connected 100% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| Pin 13 | Connected to: Not connected 100% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rosco m68k by rosco-m68k, Z80PSG1 by lynchaj, 256 word memory by ibm2030 and Zenith zt1 by misterblack1.
The 74LS93 in open source designs
The gallery holds 10 open source boards using the 74LS93 from 10 GitHub repositories; a typical one measures about 160 × 115.3 mm and carries around 65 components.
100% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Rosco m68k by rosco-m68k.
Parts used alongside the 74LS93
What boards using the 74LS93 are built for
74LS93: common questions
Where can I find a 74LS93 reference design?
Each of the 10 boards on this page is a real design using the 74LS93. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS93 pin 4 connected?
Pin 4 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74LS93.
How is the 74LS93 pin 6 connected?
Pin 6 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74LS93.
How is the 74LS93 pin 7 connected?
Pin 7 is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the 74LS93.
What parts are used alongside the 74LS93?
The 74LS04, 74LS00, 74LS02, 74LS08 and 74LS10 appear in the most repositories here.
How big is a typical board using the 74LS93?
The median is 160 × 115.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS93?
By GitHub stars, Rosco m68k by rosco-m68k, with 199 stars.
Can I simulate one of these boards using the 74LS93 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.