Rcvr bo
chickadee-tech·rcvr-bo·pcb/receiver-breakout.kicad_pcb
About the Rcvr bo PCB
Rcvr bo is an open source PCB design by chickadee-tech, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 36 × 36 mm, with 30 components from 24 distinct parts.
Other key parts include the 74LS86, 74AHC2G125, TLV70233DBV and 74LS244. By type, the board carries 7 resistors, 4 ICs, 3 connectors, 3 diodes, 2 capacitors and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Receiver Breakout Polystack Mod
You may also license the Polystack logo for free by emailing support@chickadee.tech. We'll ask for your gerbers to ensure the design complies with specifications laid out here and provide written permission to use the trademark after compliance has been demonstrated.
Main components on the Rcvr bo
Rcvr bo bill of materials (BOM)
30 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS86 | QFN-14-3.5x3.5mm | U1 |
| 1 | 74AHC2G125 | TSSOP-8_3x3mm_Pitch0.65mm | U2 |
| 1 | TLV70233DBV | SOT-23-5 | U3 |
| 1 | 74LS244 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U4 |
| 1 | Q_NMOS_GSD | SOT-23_Handsoldering | Q1 |
| 1 | CONN_02X08 | Pin_Header_Angled_2x08 | P1 |
| 1 | CONN_01X02 | Pin_Header_Angled_1x02 | P2 |
| 1 | CONN_01X04 | Pin_Header_Angled_1x04 | P3 |
| 1 | SN74LVC1G0832 | SC-70-6_Handsoldering | PORT_ANDOR1 |
| 1 | 0.1uF | C_0603_HandSoldering | PORT_C1 |
| 1 | AT24CS02-MAHM | DFN-8-1EP_3x2mm_Pitch0.5mm | PORT_IC1 |
| 1 | CKD_SANDWICH | DF40-80pin-Header | PORT_IN1 |
| 2 | SN74LVC1G58 | SC-70-6_Handsoldering | PORT_INV1, PORT_XOR1 |
| 1 | CKD_SANDWICH | DF40-3-4mm-80pin-Receptacle | PORT_OUT1 |
| 1 | CONN_01X01 | Measurement_Point_Round-SMD-Pad_Small | PORT_P1 |
| 1 | 10k | R_0603_HandSoldering | PORT_R1 |
| 1 | G*** | polystack-bold-0.4 | svg2mod |
| 1 | Green | LED_0603 | D2 |
| 1 | Yellow | LED_0603 | D3 |
| 1 | Red | LED_0603 | D4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1uF | C_0603_HandSoldering | C1 |
| 1 | 10uF | C_1206_HandSoldering | C2 |
| 4 | 10K | R_0603_HandSoldering | R1, R5, R6, R7 |
| 3 | 1k | R_0603_HandSoldering | R2, R3, R4 |
Rcvr bo design files
The KiCad project lives in the chickadee-tech/rcvr-bo repository on GitHub; these links point at the commit this page was built from.
Rcvr bo: common questions
How big is the Rcvr bo PCB?
The Rcvr bo measures 36 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rcvr bo?
30 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rcvr bo design files?
From the chickadee-tech/rcvr-bo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Rcvr bo design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which chickadee-tech chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979