Throw a-Phone
Chicken-Slayer·Throw-a-Phone·PCB/Throw-a-Phone.kicad_pcb
About the Throw a-Phone PCB
Throw a-Phone is an open source ESP32 PCB design by Chicken-Slayer, published on GitHub. It is a 2-layer board measuring 50 × 85 mm, with 26 components from 4 distinct parts.
Its main chip is the ESP32-C3_SUPERMINI_TH, from the ESP32 family. By type, the board carries 12 switches, 12 diodes, 1 IC and 1 connector.
It belongs with the audio, displays & leds and power & battery designs in this gallery.
From the project
In all seriousness, this is a device for people who need absolutely no distractions, or simply a cheap device that can be bought to simply make phone calls without any drama.
In all seriousness, this is a device for people who need absolutely no distractions, or simply a cheap device that can be bought to simply make phone calls without any drama.
It has two separate pieces: - The top cover, featuring space for the keys, power switch, screen, and audio I/O - The base, which has obtrusions designed to hold the PCB in place, as well as clearance for an external antenna and charging port.

Main components on the Throw a-Phone
Throw a-Phone bill of materials (BOM)
26 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI_TH | MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | Conn_01x04_Pin | SSD1306-0.91-OLED-4pin-128x32 | J3 |
| 12 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4 |
| 12 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
Throw a-Phone design files
The KiCad project lives in the Chicken-Slayer/Throw-a-Phone repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Throw-a-Phone.kicad_pcb
- SchematicPCB/Throw-a-Phone.kicad_sch
- BOMBOM.csv
Throw a-Phone: common questions
What microcontroller does the Throw a-Phone use?
The Throw a-Phone is built around the ESP32-C3_SUPERMINI_TH, from the ESP32 family.
How big is the Throw a-Phone PCB?
The Throw a-Phone measures 50 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Throw a-Phone?
26 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Throw a-Phone design files?
From the Chicken-Slayer/Throw-a-Phone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Throw a-Phone design in my own project?
The repository has no license, so all rights stay with Chicken-Slayer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Throw a-Phone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k