MIDI-keyboard

Chrif16·MIDI-keyboard·PCB/midi keyboard.kicad_pcb

MIDI-keyboard PCB layout, top view — open source ESP32 board by Chrif16

About the MIDI-keyboard PCB

MIDI-keyboard is an open source ESP32 PCB design by Chrif16, published on GitHub. It is a 2-layer board measuring 82.4 × 83.1 mm, with 8 components from 6 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 switches, 2 connectors and 1 IC.

It belongs with the audio, keyboards and displays & leds designs in this gallery.

From the project

another instrument project but this time with half life

a midi piano that plugs into your computer and you're able to play any music you want by touching the copper traces on the pcb. containing an esp32 s3 and 3 customizable buttons and a potentiometer slider. and it also comes equipped with a screen that visualizes your note playing in waveform. its also skeleton themed because of the halloween season. this is a part of hackclub's half life event in which i got help in starting out with a guide.

MIDI-keyboard, from the project README
From the project README

Main components on the MIDI-keyboard

MIDI-keyboard bill of materials (BOM)

8 components, 6 distinct parts.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
Capacitive touch keys
J1
1
DISPLAY
J2
1
slider
RV1
3
SW_Push
SW1, SW2, SW3
1
RotaryEncoder_Switch_MP
SW4

MIDI-keyboard design files

The KiCad project lives in the Chrif16/MIDI-keyboard repository on GitHub; these links point at the commit this page was built from.

MIDI-keyboard: common questions

What microcontroller does the MIDI-keyboard use?

The MIDI-keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the MIDI-keyboard PCB?

The MIDI-keyboard measures 82.4 × 83.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MIDI-keyboard?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the MIDI-keyboard design files?

From the Chrif16/MIDI-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MIDI-keyboard design in my own project?

The repository has no license, so all rights stay with Chrif16. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MIDI-keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards