HardLabs

Chrismcgale.github.io

chrismcgale·chrismcgale.github.io·assets/docs/rook.net

This repository ships a schematic but no board layout.

About the Chrismcgale.github.io PCB

Chrismcgale.github.io is an open source STM32 PCB design by chrismcgale, published on GitHub. It is a board, with 88 components from 51 distinct parts.

Its main chip is the STM32H743VIT6, from the STM32 family. Other key parts include the ICM-42688-P, DPS310, TPS7A2033, USBLC6-2SC6 and TPS54360B. By type, the board carries 37 capacitors, 25 resistors, 8 connectors, 7 ICs, 7 diodes and 2 inductors.

Main components on the Chrismcgale.github.io

STM32H743VIT6ICM-42688-PDPS310TPS7A2033USBLC6-2SC6TPS54360BAMS1117-3.3

Chrismcgale.github.io bill of materials (BOM)

88 components, 51 distinct parts.

QtyPartRefs
1
STM32H743VIT6
U1
1
ICM-42688-P
U2
1
DPS310
U3
1
TPS7A2033
U4
1
USBLC6-2SC6
U5
1
TPS54360B
U6
1
AMS1117-3.3
U7
1
Si7461DP
Q1
1
8MHz
Y1
1
USB_C_16P
J1
1
ESC_8pin
J2
1
RX_ELRS
J3
1
GPS_compass
J4
1
SWD
J5
1
microSD
J7
1
VTX
J9
1
BOOT_BTN
J10
1
BZT52C12
D1
1
SMAJ33A
D2
1
SS56
D3
Show 31 more
QtyPartRefs
1
B5819W
D5
1
Red
D6
2
Green
D7, D8
1
FerriteBead
FB1
1
10uH
L1
18
100nF
C1, C2, C3, C4, C5, C9, C11, C13 +10
1
4.7uF
C6
2
2.2uF
C7, C8
2
1uF
C10, C18
2
10pF
C14, C15
2
10uF
C17, C21
1
20nF
C20
1
6800pF
C27
1
39pF
C28
2
2.2uF
C30, C31
1
22uF
C32
2
47uF
C33, C34
1
10uF
C35
1
22uF
C36
3
10k
R1, R2, R7
4
4.7k
R3, R4, R5, R6
4
1k
R8, R26, R27, R28
2
5.1k
R11, R12
1
100k
R13
1
53.6k
R14
1
10.2k
R15
1
162k
R16
1
523k
R17
1
84.5k
R18
1
13k
R19
5
47k
R20, R21, R22, R23, R24

Chrismcgale.github.io design files

The KiCad project lives in the chrismcgale/chrismcgale.github.io repository on GitHub; these links point at the commit this page was built from.

Chrismcgale.github.io: common questions

What microcontroller does the Chrismcgale.github.io use?

The Chrismcgale.github.io is built around the STM32H743VIT6, from the STM32 family.

How many components are on the Chrismcgale.github.io?

88 components, from 51 distinct parts. The full bill of materials is listed on this page.

Where can I download the Chrismcgale.github.io design files?

From the chrismcgale/chrismcgale.github.io repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the Chrismcgale.github.io design in my own project?

The repository has no license, so all rights stay with chrismcgale. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Chrismcgale.github.io without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards