41 open source boards using the STM32H743VIT6

Real designs built with the STM32H743VIT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

41 boardsClear filters|Most starred

How designs wire the STM32H743VIT6

Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the STM32H743VIT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCAP pins have a capacitor to GND on 23 of 25 designs, most often 2.2 µF.
  • The VDD pins have a decoupling capacitor on 21 of 26 designs, most often 100 nF (then 4.7 µF).
  • The PH0 pin has a crystal on 20 of 25 designs, most often 25 MHz (then 16 MHz).
  • The NRST pin has a capacitor to GND on 19 of 26 designs, most often 100 nF.
VBATpin 6Connected to: 3.3V 92%
  • Decoupling capacitor on 67% · 100 nF (37), 4.7 µF (3), 10 nF (2)
VSSpin 10, 26, 49, 74, 99Connected to: GND 97%
VDDpin 11, 27, 50, 75, 100Connected to: 3.3V 97%
  • Decoupling capacitor on 81% · 100 nF (123), 4.7 µF (13), 10 µF (7)
PH0pin 12Connected to: Signal 96%
  • Crystal on 80% · 25 MHz (7), 16 MHz (5), 8 MHz (4)
  • Capacitor to GND on 68% · 12 pF (4), 18 pF (3), 15 pF (3)
PH1pin 13Connected to: Signal 84% · not connected 16%
  • Crystal on 72% · 25 MHz (7), 16 MHz (5), 8 MHz (3)
  • Capacitor to GND on 68% · 12 pF (4), 18 pF (3), 15 pF (3)
NRSTpin 14Connected to: A connector 42%
  • Capacitor to GND on 73% · 100 nF (19)
  • Pull-up to 3.3V on 38% · 10 kΩ (6), 4.7 kΩ (3)
PC2_Cpin 17Connected to: Not connected 71% · a signal 29%
PC3_Cpin 18Connected to: Not connected 71% · a signal 29%
VSSApin 19Connected to: GND 88%
VREF+pin 20Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 64% · 100 nF (25), 1 µF (13), 10 nF (2)
  • Ferrite bead on 32% · 1 kH (2)
VDDApin 21Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 71% · 100 nF (27), 1 µF (13), 10 nF (4)
  • Ferrite bead on 42% · 1 kH (2), 600 H (1)
PE15pin 45Connected to: Not connected 76% · a signal 24%
VCAPpin 48, 73Connected to: Signal 100%
  • Capacitor to GND on 92% · 2.2 µF (48)
PD14pin 61Connected to: Not connected 61% · a signal 39%
PC9pin 66Connected to: A connector 43% · not connected 30%
  • Pull-up to 3.3V on 30% · 47 kΩ (5), 4.7 kΩ (1)
PA10pin 69Connected to: Not connected 71% · a signal 29%
PC11pin 79Connected to: A connector 39% · not connected 26%
  • Pull-up to 3.3V on 35% · 47 kΩ (5), 10 kΩ (2)
PD5pin 86Connected to: Not connected 61% · a signal 39%
PD6pin 87Connected to: Not connected 61% · a signal 39%
PB4pin 90Connected to: Not connected 61% · a signal 39%
PB6pin 92Connected to: A connector 25% · not connected 25%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (4), 10 kΩ (2), 5.1 kΩ (1)
PB7pin 93Connected to: A connector 26% · not connected 39%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (4), 10 kΩ (2), 2.2 kΩ (2)
BOOT0pin 94Connected to: Signal 100%
  • Resistor to GND on 83% · 10 kΩ (16), 4.7 kΩ (2), 5.1 kΩ (1)
PE0pin 97Connected to: Not connected 61% · a signal 39%
PE1pin 98Connected to: Not connected 74% · a signal 26%

66 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cheetah-MX4-Mini by KaiPereira, Asynchronous-SPDIF-Mixer by DADDesign-Projects, F8-fc h7 rev by victorhook and ACOUSTIC-PHANTOM — Acoustic Side-Channel Analyzer by jayis1.

The STM32H743VIT6 in open source designs

The gallery holds 41 open source boards using the STM32H743VIT6 from 29 GitHub repositories; a typical one measures about 87.8 × 73.6 mm and carries around 94 components.

89% use four copper layers or more, and 49% carry an open source license.

The most starred is Cheetah-MX4-Mini by KaiPereira.

Microcontrollers on boards using the STM32H743VIT6

STM32H743VIT6: common questions

Where can I find a STM32H743VIT6 reference design?

Each of the 41 boards on this page is a real design using the STM32H743VIT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32H743VIT6 VCAP pin connected?

The VCAP pins have a capacitor to GND on 23 of 25 designs, most often 2.2 µF. Counted from the KiCad layouts of 26 open source designs using the STM32H743VIT6.

What decoupling capacitors do designs use on the STM32H743VIT6 VDD pin?

The VDD pins have a decoupling capacitor on 21 of 26 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 26 open source designs using the STM32H743VIT6.

How is the STM32H743VIT6 PH0 pin connected?

The PH0 pin has a crystal on 20 of 25 designs, most often 25 MHz (then 16 MHz). Counted from the KiCad layouts of 26 open source designs using the STM32H743VIT6.

What parts are used alongside the STM32H743VIT6?

The USBLC6-2SC6, ICM-42688-P, AMS1117-3.3, AP2112K-3.3TRG1 and W25Q128JVSIQ appear in the most repositories here.

Which microcontrollers do boards using the STM32H743VIT6 use?

Most are built on STM32 (36) and ESP32 (5).

How big is a typical board using the STM32H743VIT6?

The median is 87.8 × 73.6 mm, and 11% are two-layer designs.

What is the most popular open source board using the STM32H743VIT6?

By GitHub stars, Cheetah-MX4-Mini by KaiPereira, with 179 stars.

Can I simulate one of these boards using the STM32H743VIT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part