7 open source boards using the TPS7A2033
Real designs built with the TPS7A2033, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Sentinel HYDRA
SridharCodeVersion
93.5 × 91 mm135 parts6LApache-2.00RP2040/RP2350
Sentinel HYDRA
SridharCodeVersion
93.5 × 91 mm135 parts6LApache-2.00Interrruptus
parceval
100 × 100 mm42 parts4LBSD-3-Clause0- schematic only · 88 partsSTM32
Chrismcgale.github.io
chrismcgale
88 partsNo license0 NXP
Control rev3
PaulStoffregen
48.3 × 105.4 mm127 parts2LNo license160ESP32
CARVanta Sentinel v2
SridharCodeVersion
100 × 100 mm86 parts6LApache-2.00ESP32
CARVanta Sentinel v2
SridharCodeVersion
100 × 100 mm86 parts6LApache-2.00
The TPS7A2033 in open source designs
The gallery holds 7 open source boards using the TPS7A2033 from 5 GitHub repositories; a typical one measures about 96.8 × 100 mm and carries around 88 components.
83% use four copper layers or more, and 71% carry an open source license.
The most starred is Control rev3 by PaulStoffregen.
Parts used alongside the TPS7A2033
Microcontrollers on boards using the TPS7A2033
What boards using the TPS7A2033 are built for
TPS7A2033: common questions
Where can I find a TPS7A2033 reference design?
Each of the 7 boards on this page is a real design using the TPS7A2033. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS7A2033?
The ADS1256IDBR, AP2112K-1.8, BQ24075RGTR, BQ29700 and CH224K appear in the most repositories here.
Which microcontrollers do boards using the TPS7A2033 use?
Most are built on ESP32 (2), RP2040/RP2350 (2), NXP (1) and STM32 (1).
How big is a typical board using the TPS7A2033?
The median is 96.8 × 100 mm, and 17% are two-layer designs.
What is the most popular open source board using the TPS7A2033?
By GitHub stars, Control rev3 by PaulStoffregen, with 160 stars.
Can I simulate one of these boards using the TPS7A2033 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.