7 open source boards using the DPS310
Real designs built with the DPS310, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Aether
nasheed-x
100 × 60 mm167 parts6LNo license10ESP32
AirSensor for-HomeAssistant
MarcFinns
70 × 70 mm25 parts2LNo license8NXP
INSPACe-CanSat-Team-Tejas-PCB-Design
Rujul-Rumale
101.9 × 101.9 mm34 parts2LCERN-OHL-S-2.01ESP32
Ricardo-Pete
icl-rocketry
61 × 37 mm82 parts4LNo license0- schematic only · 94 partsSTM32
OpenVCU
Rujul-Rumale
94 partsCERN-OHL-S-2.00 - schematic only · 88 partsSTM32
Chrismcgale.github.io
chrismcgale
88 partsNo license0 STM32
Tinyfc core
wangyeee
36 × 44 mm103 parts4LBSD-3-Clause9
How designs wire the DPS310
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DPS310 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 3 of 3 designs, most often 100 nF.
- The SCK pin has a pull-up to 3.3V on 2 of 5 designs, most often 4.7 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 7 | Connected to: GND 60% · not connected 30% | — |
| SCKpin 4 | Connected to: The microcontroller 60% |
|
| VDDIOpin 6 | Connected to: 3.3V 60% · a signal 40% |
|
| VDDpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aether by nasheed-x, Tinyfc core by wangyeee, AirSensor for-HomeAssistant by MarcFinns and INSPACe-CanSat-Team-Tejas-PCB-Design by Rujul-Rumale.
The DPS310 in open source designs
The gallery holds 7 open source boards using the DPS310 from 7 GitHub repositories; a typical one measures about 70 × 60 mm and carries around 88 components.
60% use four copper layers or more, and 43% carry an open source license.
The most starred is Aether by nasheed-x.
Parts used alongside the DPS310
What boards using the DPS310 are built for
DPS310: common questions
Where can I find a DPS310 reference design?
Each of the 7 boards on this page is a real design using the DPS310. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the DPS310 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the DPS310.
What decoupling capacitors do designs use on the DPS310 VDD pin?
The VDD pin has a decoupling capacitor on 3 of 3 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the DPS310.
What pull-up resistor is used on the DPS310 SCK pin?
The SCK pin has a pull-up to 3.3V on 2 of 5 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 5 open source designs using the DPS310.
What parts are used alongside the DPS310?
The USBLC6-2SC6, ICM-42688-P and STM32H743VIT6 appear in the most repositories here.
Which microcontrollers do boards using the DPS310 use?
Most are built on ESP32 (3), STM32 (3) and NXP (1).
How big is a typical board using the DPS310?
The median is 70 × 60 mm, and 40% are two-layer designs.
What is the most popular open source board using the DPS310?
By GitHub stars, Aether by nasheed-x, with 10 stars.
Can I simulate one of these boards using the DPS310 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.