Sensors V2
About the Sensors V2 PCB
Sensors V2 is an open source PCB design by Churrosoft, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 15 × 11 mm, with 12 components from 11 distinct parts.
Other key parts include the LM321. By type, the board carries 6 resistors, 2 ICs, 1 connector, 1 jumper, 1 diode and 1 capacitor.
It belongs with the sensors designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Coleccion de PCB y planos recomendados para montar una OpenEFI
si quieres usar otra placa basada en Arduino (Uno, Mega,DUE,etc), puedes hacerlo, pero los pcb no te serviran y capaz tengas que modificar ligeramente el codigo y el mapeo de los pines, proximamente agregare mas pcb ademas de mejorar los existentes
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE.
Main components on the Sensors V2
Sensors V2 bill of materials (BOM)
12 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM321 | SOT-23-5 | U1, U2 |
| 1 | Conn_01x05_Female | PinHeader_1x05_P1.27mm_Horizontal | J1 |
| 1 | Jumper_NC_Small | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | DZ2S033X0L | D_MiniMELF | D1 |
| 1 | 240pF | C_0603_1608Metric | C1 |
| 1 | 3.32k +-1% | R_0603_1608Metric | R1 |
| 1 | 28.6k +-1% | R_0603_1608Metric | R2 |
| 1 | 2.2k | R_0603_1608Metric | R3 |
| 1 | 16k 1/10W +-1% | R_0603_1608Metric | R4 |
| 1 | 1k 1/10W +-1% | R_0603_1608Metric | R5 |
| 1 | 33k 1/10W +-1% | R_0603_1608Metric | R6 |
Sensors V2 design files
The KiCad project lives in the Churrosoft/OpenEFI-PCB repository on GitHub; these links point at the commit this page was built from.
Sensors V2: common questions
How big is the Sensors V2 PCB?
The Sensors V2 measures 15 × 11 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensors V2?
12 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensors V2 design files?
From the Churrosoft/OpenEFI-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensors V2 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Churrosoft chose for the repository.
More boards in OpenEFI-PCB
STM32OpenEFI rev4 bkp
164 × 118 mm317 parts4LCERN-OHL-S-2.08
STM32OpenEFI rev4
164 × 118 mm257 parts4LCERN-OHL-S-2.08
STM32UEFI
99 × 113 mm228 parts4LCERN-OHL-S-2.08
STM32STM32F rev3
159.6 × 99.6 mm171 parts4LCERN-OHL-S-2.08
STM32ΜEFI rev2
99.9 × 99.3 mm151 parts4LCERN-OHL-S-2.08
STM32V2
148.6 × 149.9 mm149 parts2LCERN-OHL-S-2.08
Earlier revisions in the repo: Sensors_V1
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956