HardLabs

Room camera sensor

chxuri·room-camera-sensor·PCB/PCB Source Files/highway.kicad_pcb

Room camera sensor PCB layout, top view — open source ESP32 board by chxuri
Simulate this board

About the Room camera sensor PCB

Room camera sensor is an open source ESP32 PCB design by chxuri, published on GitHub under the MIT license. It is a 2-layer board measuring 97.9 × 97.7 mm, with 27 components from 5 distinct parts.

Its main chip is the XIAO-ESP32-C3-DIP, from the ESP32 family. By type, the board carries 12 switches, 12 diodes and 1 IC.

It belongs with the sensors, keyboards and displays & leds designs in this gallery.

From the project

Highway Project for Hackclub! Security camera that is turned on by a motion sensor, records footage, and can be disabled through a special password ;)

There are descriptions of each product in the BOM.csv file and also descriptions of where the shipping/tax costs are from...

I'll also need about $5 for shipping of my 3D printed cases from print legion :3

Room camera sensor, from the project README
From the project README

Main components on the Room camera sensor

XIAO-ESP32-C3-DIP

Room camera sensor bill of materials (BOM)

27 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-DIP
U1
1
CONN_01X04_PIN
Conn_01x04_Pin
OLED1
12
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4
1
Conn_01x03_Socket
motion1
12
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +4

Room camera sensor design files

The KiCad project lives in the chxuri/room-camera-sensor repository on GitHub; these links point at the commit this page was built from.

Room camera sensor: common questions

What microcontroller does the Room camera sensor use?

The Room camera sensor is built around the XIAO-ESP32-C3-DIP, from the ESP32 family.

How big is the Room camera sensor PCB?

The Room camera sensor measures 97.9 × 97.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Room camera sensor?

27 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Room camera sensor design files?

From the chxuri/room-camera-sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Room camera sensor design in my own project?

Yes, under the terms of its MIT license, which chxuri chose for the repository.

Can I test firmware for the Room camera sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards