Poncho L86
About the Poncho L86 PCB
Poncho L86 is an open source PCB design by ciaa, published on GitHub. It is a 2-layer board measuring 40.6 × 61 mm, with 19 components from 16 distinct parts.
Other key parts include the TLP627-4. By type, the board carries 5 connectors, 5 resistors, 3 capacitors, 1 IC, 1 transistor and 1 diode.
From the project
Ponchos ======= Repositorio de Ponchos para la EDU-CIAA.
Ponchos ======= Repositorio de Ponchos para la EDU-CIAA.
Llamamos Ponchos a los módulos conectables para montarse sobre el módulo procesador EDU-CIAA. Esperamos que el nombre “Poncho” se utilice como “Shield” en Arduino entre la comunidad del proyecto CIAA.
La documentación adicional sobre Ponchos se encuentra en la Wiki del proyecto CIAA.
Estructura de directorios -------------------------
Main components on the Poncho L86
Poncho L86 bill of materials (BOM)
19 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLP627-4 AP111733 | SOT-223 | U1 |
| 1 | FQT13N06L BC847B | SOT-23 | Q1 |
| 1 | I2C JP_Vcc | Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | RS-232 SMA | sma_90 | J2 |
| 1 | TB_1X3 JP_TX | Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
| 1 | TB_1X3 JP_RX | Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | TB_1X2 CONN_USB-UART | Socket_Strip_Angled_2x05_Pitch2.54mm | J5 |
| 1 | PCB_HOLE | Led_Hole | H2 |
| 1 | L86 | L86 | UC1 |
| 1 | CONN_PONCHO2P_2X_20X2 Conn_PonchoMP_2x_20x2 | Conn_Poncho_Derecha_Sin_Pin_Desc | XA1 |
| 1 | LT8A22 | LED_0805 | D1 |
| 2 | 100NF 10uF/16V | CP_Elec_4x5.3 | C1, C2 |
| 1 | 100NF 100nF | C_0805_HandSoldering | C3 |
| 1 | 100 470 | R_0805_HandSoldering | R1 |
| 2 | 3.3K 4K7 | R_0805_HandSoldering | R2, R5 |
| 2 | 3.3K 1K | R_0805_HandSoldering | R3, R4 |
Poncho L86 design files
The KiCad project lives in the ciaa/Ponchos repository on GitHub; these links point at the commit this page was built from.
Poncho L86: common questions
How big is the Poncho L86 PCB?
The Poncho L86 measures 40.6 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Poncho L86?
19 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Poncho L86 design files?
From the ciaa/Ponchos repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Poncho L86 design in my own project?
The repository has no license, so all rights stay with ciaa. Use it as a reference, and ask the author before reusing the design.
More boards in Ponchos
Poncho MIDI
85.8 × 137 mm126 parts2LNo license15
PONCHO PLC
150 × 100 mm116 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.7 × 137.2 mm58 parts2LNo license15
EDU-CIAA-NXP Port's Expander - Circuito Impreso
86 × 137 mm56 parts2LNo license15
PonchoSumoRobot
85.9 × 137.2 mm54 parts2LNo license15
Poncho Ethernet LAN8720A
55.3 × 65.4 mm47 parts2LNo license15
ESP8266Detector de caídas
85.7 × 137.2 mm40 parts2LNo license15
Poncho Edu CIAA - Esquemático Jerarquico
86 × 137.3 mm34 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.9 × 137 mm27 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.7 × 137.2 mm23 parts2LNo license15
Poncho Misión SAEv2
85.9 × 80 mm13 parts2LNo license15