Detector de caídas
About the Detector de caídas PCB
Detector de caídas is an open source ESP8266 PCB design by ciaa, published on GitHub. It is a 2-layer board measuring 85.7 × 137.2 mm, with 40 components from 30 distinct parts.
Its main chip is the esp8266, from the ESP8266 family. Other key parts include the TLP627-4 and MCP1416. By type, the board carries 14 resistors, 6 diodes, 5 capacitors, 4 ICs, 4 transistors and 2 connectors.
Main components on the Detector de caídas
Detector de caídas bill of materials (BOM)
40 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLP627-4 24LC64 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | TLP627-4 LM2596 | TO-263-5Lead | U2 |
| 1 | MCP1416 NCP1117ST33T3G | SOT-223 | U3 |
| 1 | MCP1416 Buzzer | Buzzer_12x9.5RM7.6 | U4 |
| 4 | FQT13N06L 2N7002 | SOT-23_Handsoldering | Q1, Q2, Q3, Q4 |
| 1 | I2C TB_1X2 | bornier2 | J1 |
| 1 | CONN_02X01 | Pin_Header_Straight_2x01 | P2 |
| 1 | CONN_01X08 | adxl345 | ADXL345 |
| 1 | CONN_02X04 | esp8266 | ESP8266 |
| 1 | CONN_01X07 | sim800l | SIM800 |
| 1 | CONN_PONCHO2P_2X_20X2 Conn_Poncho2P_2x_20x2 | Conn_Poncho_Completo | XA1 |
| 3 | LED | LED-3MM | D1, D2, D3 |
| 1 | PMEG3020EH | SOD123F | D4 |
| 1 | B540C-13-F | SMC_Handsoldering | D5 |
| 1 | SMAZ5V6 | SOD123F | D6 |
| 1 | 47uH | SRN1060 | L1 |
| 1 | 100NF 100nF | C_0805_HandSoldering | C1 |
| 1 | 100NF 470uF | c2 | C2 |
| 1 | 100NF 330uF | c3 | C3 |
| 1 | 100NF 10uF | TantalC_SizeA_EIA-3216_HandSoldering | C4 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 100nF | C_0805_HandSoldering | C5 |
| 1 | 100 680 | R_0805_HandSoldering | R1 |
| 3 | 3.3K 10K | R_0805_HandSoldering | R2, R5, R8 |
| 2 | 3.3K 330K | R_0805_HandSoldering | R3, R6 |
| 2 | 3.3K 680 | R_0805_HandSoldering | R4, R7 |
| 2 | 4.7K 330K | R_0805_HandSoldering | R9, R13 |
| 1 | 4.7K 470K | R_0805_HandSoldering | R10 |
| 1 | 4.7K 270K | R_0805_HandSoldering | R11 |
| 1 | 4.7K 10K | R_0805_HandSoldering | R12 |
| 1 | 4.7K 680 | R_0805_HandSoldering | R14 |
Detector de caídas design files
The KiCad project lives in the ciaa/Ponchos repository on GitHub; these links point at the commit this page was built from.
Detector de caídas: common questions
What microcontroller does the Detector de caídas use?
The Detector de caídas is built around the esp8266, from the ESP8266 family.
How big is the Detector de caídas PCB?
The Detector de caídas measures 85.7 × 137.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Detector de caídas?
40 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Detector de caídas design files?
From the ciaa/Ponchos repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Detector de caídas design in my own project?
The repository has no license, so all rights stay with ciaa. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Detector de caídas without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Ponchos
Poncho MIDI
85.8 × 137 mm126 parts2LNo license15
PONCHO PLC
150 × 100 mm116 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.7 × 137.2 mm58 parts2LNo license15
EDU-CIAA-NXP Port's Expander - Circuito Impreso
86 × 137 mm56 parts2LNo license15
PonchoSumoRobot
85.9 × 137.2 mm54 parts2LNo license15
Poncho Ethernet LAN8720A
55.3 × 65.4 mm47 parts2LNo license15
Poncho Edu CIAA - Esquemático Jerarquico
86 × 137.3 mm34 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.9 × 137 mm27 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.7 × 137.2 mm23 parts2LNo license15
Poncho L86
40.6 × 61 mm19 parts2LNo license15
Poncho Misión SAEv2
85.9 × 80 mm13 parts2LNo license15
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266Duet WIFI
Duet3D
100 × 123 mm345 partsCERN-OHL-1.2257
ESP8266RetroWiFiModem
mecparts
100 × 66.1 mm29 parts2LGPL-3.0256
ESP8266Mideahvac dongle
reneklootwijk
20 × 48.5 mm19 parts2LNo license74
ESP8266Single radio
AnyLeaf
37.7 × 37.7 mm43 parts4LMIT63
ESP8266Esp8266-for uppatvind
horvathgergo
70 × 36 mm27 parts2LGPL-3.060