Oscilloscopio
ciaa·Ponchos·Osciloscopio/Oscilloscopio.kicad_pcb
About the Oscilloscopio PCB
Oscilloscopio is an open source PCB design by ciaa, published on GitHub. It is a 2-layer board measuring 85.7 × 137.2 mm, with 58 components from 25 distinct parts.
Other key parts include the MAX232, 78L05, 79L05, TL082 and CD4066. By type, the board carries 25 resistors, 13 capacitors, 5 ICs, 5 diodes, 4 transistors and 2 inductors.
From the project
Ponchos ======= Repositorio de Ponchos para la EDU-CIAA.
Ponchos ======= Repositorio de Ponchos para la EDU-CIAA.
Llamamos Ponchos a los módulos conectables para montarse sobre el módulo procesador EDU-CIAA. Esperamos que el nombre “Poncho” se utilice como “Shield” en Arduino entre la comunidad del proyecto CIAA.
La documentación adicional sobre Ponchos se encuentra en la Wiki del proyecto CIAA.
Estructura de directorios -------------------------

Main components on the Oscilloscopio
Oscilloscopio bill of materials (BOM)
58 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX232 | DIP-16_W7.62mm_LongPads | U1 |
| 1 | 78L05 | TO-92_Inline_Wide | U2 |
| 1 | 79L05 | TO-92_Inline_Wide | U3 |
| 1 | TL082 | DIP-8_W7.62mm_LongPads | U4 |
| 1 | CD4066 | DIP-14_W7.62mm_LongPads | U5 |
| 4 | BC557 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4 |
| 1 | BNC | BNC_Socket_TYCO-AMP_LargePads | P1 |
| 1 | 10k | Potentiometer_Alps-RK16-single | RV1 |
| 1 | 150k | Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV2 |
| 1 | Conn_Poncho2P_2x_20x2 | poncho_grande | XA1 |
| 4 | BAT54 | SOT-323 | D1, D2, D3, D4 |
| 1 | Display | Display | D5 |
| 2 | HZ0805E601R-10 | R_0805_HandSoldering | FB1, FB2 |
| 5 | 1uF | C_Radial_D5_L11_P2 | C1, C2, C3, C4, C5 |
| 8 | 100nF | C_0805_HandSoldering | C6, C7, C8, C9, C10, C11, C12, C14 |
| 1 | 10k | R_0805_HandSoldering | R1 |
| 5 | 100k | R_0805_HandSoldering | R2, R3, R4, R5, R7 |
| 1 | 910k | R_0805_HandSoldering | R6 |
| 4 | 47k | R_0805_HandSoldering | R8, R9, R10, R11 |
| 3 | 56k | R_0805_HandSoldering | R12, R17, R19 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 18k | R_0805_HandSoldering | R13 |
| 1 | 5k6 | R_0805_HandSoldering | R14 |
| 1 | 1k8 | R_0805_HandSoldering | R15 |
| 1 | 150k | R_0805_HandSoldering | R16 |
| 7 | 33 | R_0805_HandSoldering | R20, R21, R22, R23, R24, R25, R26 |
Oscilloscopio design files
The KiCad project lives in the ciaa/Ponchos repository on GitHub; these links point at the commit this page was built from.
Oscilloscopio: common questions
How big is the Oscilloscopio PCB?
The Oscilloscopio measures 85.7 × 137.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Oscilloscopio?
58 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Oscilloscopio design files?
From the ciaa/Ponchos repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Oscilloscopio design in my own project?
The repository has no license, so all rights stay with ciaa. Use it as a reference, and ask the author before reusing the design.
More boards in Ponchos
Poncho MIDI
ciaa
85.8 × 137 mm126 parts2LNo license15PONCHO PLC
ciaa
150 × 100 mm116 parts2LNo license15EDU-CIAA-NXP Port's Expander - Circuito Impreso
ciaa
86 × 137 mm56 parts2LNo license15PonchoSumoRobot
ciaa
85.9 × 137.2 mm54 parts2LNo license15Poncho Ethernet LAN8720A
ciaa
55.3 × 65.4 mm47 parts2LNo license15ESP8266
Detector de caídas
ciaa
85.7 × 137.2 mm40 parts2LNo license15Poncho Edu CIAA - Esquemático Jerarquico
ciaa
86 × 137.3 mm34 parts2LNo license15Poncho grande
ciaa
85.9 × 137 mm27 parts2LNo license15Ethernet LAN8720A v2 old
ciaa
85.7 × 137.2 mm23 parts2LNo license15Poncho L86
ciaa
40.6 × 61 mm19 parts2LNo license15Poncho Misión SAEv2
ciaa
85.9 × 80 mm13 parts2LNo license15