PONCHO PLC
About the PONCHO PLC PCB
PONCHO PLC is an open source PCB design by ciaa, published on GitHub. It is a 2-layer board measuring 150 × 100 mm, with 116 components from 25 distinct parts.
Other key parts include the TLP627-4 and MCP1416. By type, the board carries 45 resistors, 19 diodes, 11 connectors, 8 transistors, 8 capacitors and 6 ICs.
From the project
Ponchos ======= Repositorio de Ponchos para la EDU-CIAA.
Ponchos ======= Repositorio de Ponchos para la EDU-CIAA.
Llamamos Ponchos a los módulos conectables para montarse sobre el módulo procesador EDU-CIAA. Esperamos que el nombre “Poncho” se utilice como “Shield” en Arduino entre la comunidad del proyecto CIAA.
La documentación adicional sobre Ponchos se encuentra en la Wiki del proyecto CIAA.
Estructura de directorios -------------------------
Main components on the PONCHO PLC
PONCHO PLC bill of materials (BOM)
116 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TLP627-4 | DIP_16-300_socket | U1, U2 |
| 4 | MCP1416 | SOT-23-5 | U3, U4, U5, U6 |
| 4 | FQT13N06L | SOT-223 | Q1, Q2, Q3, Q4 |
| 4 | 2N7002 | SOT23 | Q5, Q6, Q7, Q8 |
| 1 | I2C | pin_strip_4 | J1 |
| 1 | RS-232 | HEADER-4H | J2 |
| 6 | TB_1X3 | BORNERA3 | J3, J4, J8, J9, J10, J11 |
| 3 | TB_1X2 | BORNERA2 | J5, J6, J7 |
| 1 | WC1602A LCD16X2 | LCD_16x2 | DS1 |
| 4 | Mounting_Hole | Separador_M3_5mm | H1, H2, H3, H4 |
| 4 | Jumper | Pin_strip_2 | JP1, JP2, JP3, JP4 |
| 4 | RELAY_C | Relay_C | K1, K2, K3, K4 |
| 1 | 10K | TRIMER_V | RV1 |
| 4 | PTS12066V100 | PTC_1210 | TH1, TH2, TH3, TH4 |
| 1 | CONN_PONCHO2P_2X_20X2 Conn_Poncho2P_2x_20x2 | Conector_EDU_CIA_SOLO | XA1 |
| 15 | LED red | LED_1206 | D1, D2, D3, D4, D5, D6, D7, D8 +7 |
| 4 | LL4148 | SOD80C | D14, D15, D18, D19 |
| 4 | 100NF 100nF | C_1206 | C1, C2, C3, C4 |
| 4 | 1UF 1uF | C_1206 | C5, C6, C7, C8 |
| 1 | 100 | R_1206 | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 3.3K 3.3k | R_1206 | R2, R3, R4, R5, R6, R7, R8 |
| 7 | 4.7K 4.7k | R_1206 | R9, R10, R11, R12, R13, R14, R15 |
| 7 | 2.2K 2.2k | R_1206 | R16, R18, R20, R22, R24, R26, R28 |
| 15 | 100K 100k | R_1206 | R17, R19, R21, R23, R25, R27, R29, R30 +7 |
| 8 | 330 | R_1206 | R34, R35, R36, R37, R40, R41, R44, R45 |
PONCHO PLC design files
The KiCad project lives in the ciaa/Ponchos repository on GitHub; these links point at the commit this page was built from.
PONCHO PLC: common questions
How big is the PONCHO PLC PCB?
The PONCHO PLC measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PONCHO PLC?
116 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PONCHO PLC design files?
From the ciaa/Ponchos repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PONCHO PLC design in my own project?
The repository has no license, so all rights stay with ciaa. Use it as a reference, and ask the author before reusing the design.
More boards in Ponchos
Poncho MIDI
85.8 × 137 mm126 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.7 × 137.2 mm58 parts2LNo license15
EDU-CIAA-NXP Port's Expander - Circuito Impreso
86 × 137 mm56 parts2LNo license15
PonchoSumoRobot
85.9 × 137.2 mm54 parts2LNo license15
Poncho Ethernet LAN8720A
55.3 × 65.4 mm47 parts2LNo license15
ESP8266Detector de caídas
85.7 × 137.2 mm40 parts2LNo license15
Poncho Edu CIAA - Esquemático Jerarquico
86 × 137.3 mm34 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.9 × 137 mm27 parts2LNo license15
Poncho Grande - Modelo - Ejemplo - Template
85.7 × 137.2 mm23 parts2LNo license15
Poncho L86
40.6 × 61 mm19 parts2LNo license15
Poncho Misión SAEv2
85.9 × 80 mm13 parts2LNo license15