Clackotron hardware
clackotron·clackotron_hardware·clackotron2000/clackotron2000.kicad_pcb
About the Clackotron hardware PCB
Clackotron hardware is an open source ESP32 PCB design by clackotron, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 73.5 × 65 mm, with 59 components from 26 distinct parts.
Its main chip is the C2913204, from the ESP32 family. Other key parts include the PCF85263ATL, AMS1117-3.3 and MAX481E. By type, the board carries 20 resistors, 15 capacitors, 9 diodes, 4 ICs, 4 transistors and 2 connectors.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
KiCAD hardware schematic and layout files for the clackotron project
The hardware is based around an ESP32-S3 and designed in KiCAD 9.x. The production files can be used to easily order the latest version of the PCB from a manufacturer. (JLCPCB)
Most notably, the hardware contains: 30V DC input and +/-/A/B connector (same as SBB split flap modules). Internal power supply for 5V (RS485) and 3.3V (ESP32-S3). An ESP32-S3 on which the firmware and webinterface will run. A level converter for sending/receiving RS485 from the ESP32-S3. An RTC (PCF85263A) and battery for time-keeping while offline. Two buttons and a RGB-Led for misc. functionality.
Main components on the Clackotron hardware
Clackotron hardware bill of materials (BOM)
59 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF85263ATL | DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.3x2.2mm | U1 |
| 1 | C2913204 ESP32-S3-WROOM-1(N8R2) ESPRESSIF(乐鑫) | WIRELM-SMD_ESP32-S3-WROOM-1 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | MAX481E | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 4 | BSN20 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | C466970 Power | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2 |
| 1 | C557656 Output | TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | J3 |
| 1 | C964837 Battery_Cell | BAT-SMD_MYOUNG_MY-2032-04 | BT1 |
| 2 | K2-1102SP-C4SC-04 韩国韩荣 | KEY-SMD_4P-L6.0-W6.0-P4.50-LS9.5-BL | SW1, SW2 |
| 1 | USB3.1C16PFSMT 精拓金 | USB-C-SMD_TYPE-C-USB-17 | USBC1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 3 | LESD5D5.0CT1G LRC(乐山无线电) | SOD-523_L1.2-W0.8-LS1.6-BI | D2, D3, D5 |
| 2 | 1N4007 | D_SMA | D4, D7 |
| 1 | LED | LED_0805_2012Metric | D6 |
| 2 | SMBJ12CA | D_SMB | D9, D10 |
| 9 | 100NF 100nF | C_0805_2012Metric | C1, C3, C4, C6, C7, C10, C12, C13 +1 |
| 3 | 1UF 1uF | C_0805_2012Metric | C2, C5, C9 |
| 1 | 47UF/35V 47uF/35V | CAP-SMD_BD6.3-L6.6-W6.6-LS7.2-FD | C8 |
| 2 | 22UF 22uF | C_1206_3216Metric | C11, C14 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 10K 10k | R_0805_2012Metric | R1, R2, R3, R4, R7, R10, R15, R16 +2 |
| 2 | 5.1K 5.1k | R_0805_2012Metric | R5, R6 |
| 1 | 220R | R_1206_3216Metric | R8 |
| 1 | 1K1 1k1 | R_0805_2012Metric | R9 |
| 4 | 2K2 2k2 C325794 | R_0805_2012Metric | R11, R12, R13, R14 |
| 2 | 10R | R_1206_3216Metric | R19, R20 |
Clackotron hardware design files
The KiCad project lives in the clackotron/clackotron_hardware repository on GitHub; these links point at the commit this page was built from.
Clackotron hardware: common questions
What microcontroller does the Clackotron hardware use?
The Clackotron hardware is built around the C2913204, from the ESP32 family.
How big is the Clackotron hardware PCB?
The Clackotron hardware measures 73.5 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clackotron hardware?
59 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Clackotron hardware design files?
From the clackotron/clackotron_hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Clackotron hardware design in my own project?
Yes, under the terms of its GPL-3.0 license, which clackotron chose for the repository.
Can I test firmware for the Clackotron hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k