11 open source boards using the C2913204

Real designs built with the C2913204, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the C2913204

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the C2913204 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ.
  • The EN pin has a capacitor to GND on 8 of 10 designs, most often 1 µF (then 100 nF).
  • The IO0 pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ.
  • The 3V3 pin is tied to 3.3V on 8 of 10 designs (a signal on 2).
GNDpin 1, 40, 41Connected to: GND 92%
3V3pin 2Connected to: 3.3V 80% · a signal 20%
ENpin 3Connected to: BC817 30%
  • Pull-up to 3.3V on 80% · 10 kΩ (8)
  • Capacitor to GND on 80% · 1 µF (7), 100 nF (2)
IO7pin 7Connected to: A connector 20%
  • Series resistor on 60% · 7.5 kΩ (3), 33 Ω (2), 150 Ω (1)
  • Resistor to GND on 30% · 2.7 kΩ (3)
IO15pin 8Connected to: A connector 20%, 6N138 20%
  • Pull-up to 3.3V on 40% · 1 kΩ (2), 4.7 kΩ (1), 2.2 kΩ (1)
IO8pin 12Connected to: Signal 60% · not connected 20% · 3.3V 20%
  • Resistor to GND on 30% · 2.7 kΩ (3)
  • Series resistor on 30% · 7.5 kΩ (3)
IO9pin 17Connected to: Signal 75% · not connected 25%
  • Resistor to GND on 38% · 2.7 kΩ (3)
  • Series resistor on 38% · 7.5 kΩ (3)
IO10pin 18Connected to: Signal 88%
  • Resistor to GND on 38% · 2.7 kΩ (3)
  • Series resistor on 38% · 7.5 kΩ (3)
IO47pin 24Connected to: Signal 75% · not connected 25%
  • Resistor to GND on 50% · 2.7 kΩ (3), 1 MΩ (1)
  • Series resistor on 38% · 7.5 kΩ (3)
IO48pin 25Connected to: Signal 75% · not connected 25%
  • Resistor to GND on 38% · 2.7 kΩ (2), 1 MΩ (1)
IO0pin 27Connected to: BC817 38%
  • Pull-up to 3.3V on 100% · 10 kΩ (8)
IO2pin 38Connected to: ADS1015IDGST 38%, D-SUB-DR-25PCM-BB 25%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (3), 10 kΩ (1)
IO1pin 39Connected to: ADS1015IDGST 38%, D-SUB-DR-25PCM-BB 25%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (3), 10 kΩ (1)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LuxDMX by tombueng, Electronics-Design-Exploiteers-Hacker-Pager by exploiteers, DSH-PROSE by DSHSTUDIOS and LADA by milutintech.

The C2913204 in open source designs

The gallery holds 11 open source boards using the C2913204 from 10 GitHub repositories; a typical one measures about 128.4 × 70.8 mm and carries around 90 components.

55% use four copper layers or more, and 45% carry an open source license.

The most starred is LuxDMX by tombueng.

Microcontrollers on boards using the C2913204

C2913204: common questions

Where can I find a C2913204 reference design?

Each of the 11 boards on this page is a real design using the C2913204. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the C2913204 EN pin?

The EN pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the C2913204.

What pull-up resistor is used on the C2913204 IO0 pin?

The IO0 pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the C2913204.

How is the C2913204 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the C2913204.

What parts are used alongside the C2913204?

The ADS1015IDGST, BC817, BTS716GB, CP2102N-A02-GQFN28R and MCP2515-I/ST appear in the most repositories here.

Which microcontrollers do boards using the C2913204 use?

Most are built on ESP32 (11).

How big is a typical board using the C2913204?

The median is 128.4 × 70.8 mm, and 45% are two-layer designs.

What is the most popular open source board using the C2913204?

By GitHub stars, LuxDMX by tombueng, with 90 stars.

Can I simulate one of these boards using the C2913204 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part