Midi big
clemenskuske·midi_development_board
About the Midi big PCB
Midi big is an open source ESP32 PCB design by clemenskuske, published on GitHub. It is a 2-layer board measuring 157.5 × 91.3 mm, with 96 components from 20 distinct parts.
Its main chip is the ESP32-S2-WROVER-I, from the ESP32 family. Other key parts include the 74LCX07. By type, the board carries 43 resistors, 10 switches, 10 LEDs, 7 connectors, 4 modules and 4 diodes.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
Simple board to intercept and modify midi signals with ESP32
Main components on the Midi big
Midi big bill of materials (BOM)
96 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LCX07 | optocoppler | U1, U2 |
| 3 | MIDI IN | midi | M1, M2, M3 |
| 1 | locked | midi | M4 |
| 6 | DIN-5_180degree | midi | J1, J2, J3, J4, J5, J6 |
| 1 | Conn_01x02_Pin | chinch | P1 |
| 1 | C5 | C_0805_2012Metric | 15pF1 |
| 1 | C6 | C_0805_2012Metric | 15pF2 |
| 1 | C7 | C_0805_2012Metric | 15pF3 |
| 1 | C | C_0805_2012Metric | 15pF4 |
| 1 | ESP32-S2-WROVER-I | ESP32-S2-WROVER | ESP1 |
| 4 | 6N137 | DIP-8_W7.62mm | O1, O2, O3, O4 |
| 10 | SW_DIP_x01 | switch | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 3 | SW_DIP_x01 | switch | SWX1, SWX2, SWX3 |
| 10 | LED | LED | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +2 |
| 4 | type="D" model="1N4148/1N400x" lib="" | SOD-80 | D1, D2, D3, D4 |
| 4 | 0.1uF | CP_EIA-3528-12_Kemet-T | C1, C2, C3, C4 |
| 14 | 220 | R_0603_1608Metric | R1, R2, R3, R4, R22, R23, R24, R25 +6 |
| 17 | 10k | R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11, R12 +9 |
| 6 | 33 | R_0402_1005Metric | R32, R33, R34, R35, R36, R37 |
| 6 | 10 | R_0402_1005Metric | R38, R39, R40, R41, R42, R43 |
Midi big design files
The KiCad project lives in the clemenskuske/midi_development_board repository on GitHub; these links point at the commit this page was built from.
- Layoutmidi_big.kicad_pcb
- Schematicmidi_big.kicad_sch
Midi big: common questions
What microcontroller does the Midi big use?
The Midi big is built around the ESP32-S2-WROVER-I, from the ESP32 family.
How big is the Midi big PCB?
The Midi big measures 157.5 × 91.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi big?
96 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Midi big design files?
From the clemenskuske/midi_development_board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Midi big design in my own project?
The repository has no license, so all rights stay with clemenskuske. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi big without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in midi_development_board
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k