Midi
clemenskuske·midi_development_board
About the Midi PCB
Midi is an open source ESP32 PCB design by clemenskuske, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 32 components from 14 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. By type, the board carries 14 resistors, 5 switches, 5 LEDs, 2 connectors, 1 IC and 1 module.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
Simple board to intercept and modify midi signals with ESP32
Main components on the Midi
Midi bill of materials (BOM)
32 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | MIDI IN | midi | M1 |
| 1 | DIN-5_180degree | midi | J1 |
| 1 | Conn_01x02_Pin | chinch | P1 |
| 1 | C5 | C_0805_2012Metric | 15pF1 |
| 1 | 6N137 | optocoppler | O1 |
| 5 | SW_DIP_x01 | switch | SW1, SW2, SW3, SW4, SW5 |
| 5 | LED | LED | LED1, LED2, LED3, LED4, LED5 |
| 1 | type="D" model="1N4148/1N400x" lib="" | SOD-80 | D1 |
| 1 | 0.1uF | CP_EIA-3528-12_Kemet-T | C1 |
| 6 | 220 | R_0603_1608Metric | R1, R8, R9, R10, R11, R12 |
| 6 | 10k | R_0603_1608Metric | R2, R3, R4, R5, R6, R7 |
| 1 | 33 | R_0402_1005Metric | R13 |
| 1 | 10 | R_0402_1005Metric | R14 |
Midi design files
The KiCad project lives in the clemenskuske/midi_development_board repository on GitHub; these links point at the commit this page was built from.
- Layoutmidi.kicad_pcb
- Schematicmidi.kicad_sch
Midi: common questions
What microcontroller does the Midi use?
The Midi is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Midi PCB?
The Midi measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi?
32 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Midi design files?
From the clemenskuske/midi_development_board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Midi design in my own project?
The repository has no license, so all rights stay with clemenskuske. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in midi_development_board
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k