5 open source boards using the MAX-M10M-00B
Real designs built with the MAX-M10M-00B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32OBSPro
FabianSchwartau
64 × 77 mm117 parts4LLGPL-2.13
STM32Firmware edition
coffee-and-telesense
70.4 × 69.5 mm98 parts2LNo license2
STM32Dorji gps
70.9 × 70.4 mm86 parts2LNo license2
PayloadDorji
85.9 × 85.9 mm48 parts2LNo license2
Gnss test
18.2 × 36.4 mm16 parts2LNo license2
The MAX-M10M-00B in open source designs
The gallery holds 5 open source boards using the MAX-M10M-00B from 2 GitHub repositories; a typical one measures about 70.4 × 70.4 mm and carries around 86 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is OBSPro by FabianSchwartau.
What boards using the MAX-M10M-00B are built for
MAX-M10M-00B: common questions
Where can I find a MAX-M10M-00B reference design?
Each of the 5 boards on this page is a real design using the MAX-M10M-00B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MAX-M10M-00B use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the MAX-M10M-00B?
The median is 70.4 × 70.4 mm, and 80% are two-layer designs.
What is the most popular open source board using the MAX-M10M-00B?
By GitHub stars, OBSPro by FabianSchwartau, with 3 stars.
Can I simulate one of these boards using the MAX-M10M-00B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.